| Model: | BE-Series |
|---|---|
| Brand: | DGBELL |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | battery safety test , battery crush test , battery squeeze test |
| Price: |
US $8000
/ set
|
| Min. Order: | 1 set |
| Last Online:27 Dec, 2019 |
Application
Battery Crush tester is Bell company newly designed machine, designed with purpose of space and cost saving. This machine applied for various battery simulate when handling the waste been crushed condition.
Principle
The testing battery crushed by two flat plate,13KN force added by the bench clamp or piston of 32mm diameter hydraulic arm, continuous crush till the hydraulic device pressure gauge reach 17MPa, Once reach the maximum pressure, then release the crush.
Demension & Technical Parameters
|
Max. Force |
1KN-20KN(Controllable) |
|
Piston Diameter |
32mm |
|
Driving method |
Hydraulic |
|
Unit Switch |
Kg/N/Lb |
|
Crush Range |
0~200MM |
|
Crush Accuracy |
±1% |
|
Crush Duration Time |
0~99 hour 99mins 99sec. |
|
Control Method |
PLC Touch Screen Control (7 inch screen) |
|
Chamber Dimension |
W750X D650 X H1900mm |
|
Controller Dimension |
W330 X D330 X H1040mm |
|
Power Source |
AC 380V |
|
Power |
2.0KW |
|
Gross Weight |
About 350KG |
Standard Compliance
GB/T 2900.11-1988 Terminology of (secondary) cell or battery
YD 1268- 2003 The safety specification and test method for lithium batteries and charger--crush test
SJ/T 11169-1998 Standard for lithium batteries crush test
UL 1642 Lithium Batteries --Crush Test
GB/T 8897.4-2002 Primary batteries: Safety of lithium batteries --crush test
SJ/T 11170-1998 Standard for household and commercial batteries --crush test
YDB 032-2009 Back-up Lithium-ion battery for telecommunications
UL2054 Lithium Batteries
QB/T 2502-2000 General specification of lithium-ion battery --crush test
