| Model: | BE-Series |
|---|---|
| Brand: | DGBELL |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | battery wash test , battery safety test , testing equipment |
| Price: |
US $15000
/ set
|
| Min. Order: | 1 set |
| Last Online:27 Dec, 2019 |
Battery Washing Tester BE-XD-6050
( Patent No.:201220243475 )
General Introduction
Lithium ion battery washing tester design and produced according to national standard GB portable lithium ion battery and battery pack for electronic products. Lithium ion battery easy get short circuit under 45 ℃ alkaline solution. Simulate safety problem which may occur when lithium ion battery inside polyester fabric in the running washing machine.
Application
1 Portable type electronic use lithium battery pack.
2 Lithium battery pack which able to put in pocket or portable type which used for electronic products.
3 Other electronic products use portable battery packs.
4 Non user replaceable battery/battery pack for electronic products.
Standard Compliance
GB31241-2014
Features
1 Built in SUS316#stainless steel water tank,used for alkaline solution proportion and testing liquid recollection.
2 High performance plastic water pump, able to get the alkaline solution from the stainless steel tank to the testing barrel in certain time, and the plastic material pump will not get rust or Oxidation, with long life service.
3 Testing inner barrel with SUS316# mirror treated stainless steel, good appearance and acid base resistant, middle with polyurethane insulation material, external with SUS304#stainless steel
4 PLC + Touch Screen Control, system finish the whole test automatically.
5 Driving system with servo motor, with features like large torque, Large rotational speed span, stable running etc.
6 Temperature control system, with SIMENS temperature module, PID auto calculating, high precision and stable running.
7 Easy water adding design:water tank top with large open design, when need adding water, the whole cover can be take off. Other time can cover it, safety and dust proof.
8 Humanized operation design:the whole operation finish within height1 meter to 1.5 meters, no need operators to stay down or get higher purposely ,all operation can be finished smoothly.
9 Movable Function Design:installed 4 universal wheel and casters on bottom side of the chamber, which makes the machine easy move to certain place as they want, and easy for fixing the machine.
Parameters
|
1 Testing Plate outer diameter |
550MM |
|
2 Diameter of inner testing barrel |
650MM |
|
3 Deepth of inner testing barrel |
550MM |
|
4 Plate rotation speed range |
1—900rpm/min controllable |
|
5 Servo motor power |
5.0KW |
|
6 Heating pipe power |
6.0KW |
|
7 Lifting & down plate Power |
120W |
|
8 Water Pump Power |
100W |
|
9 Control Method |
PLC Touch Screen control |
|
10 Servo Motor |
With Japan Panasonic servo motor |
|
11 Time Setting |
0-999hours controllable |
|
12 Temperature Fluctuation |
±1℃ |
|
13 Temperature Uniformity |
±2℃ |
|
14 Temp. Heating Rate |
1℃/MIN(average ) |
|
16 Water Input Control Method |
Water Pump automatic adding water |
|
17 Heating Control System |
Heating Pipe:independent water temperature control heating and temperature chamber control heating . |
|
Control Method:controller output signal through SSR relay realize high precision no touch switch control. |
Structure
|
1 Inner Material |
Inner barrel SUS 304#stainless steel(thickness 3MM),inner chamberSUS304#stainless steel(thickness 1.2MM) |
|
2 External Material |
Cold rolled powder painted (thickness 1.5mm) |
|
3 Chamber Door |
Single Left open door, with observation window, with explosion proof lock |
|
4 Protection System |
The whole testing system consist of inner barrel and external chamber, with strong explosion-proof performance. Even if the battery explode inside the chamber, there will be no damage for the outside chamber. |
|
5Water Drainage System |
With auto water drainage valve on bottom side of the liquid collection chamber, easy for testing water drain out laboratory. |
|
4 Chamber Base |
Installed 4 piece universal wheel, easy for moving and fixing. |
|
5 Overall Dimension |
W1550 X H1900 X D1200 MM |
|
5 Power Source |
AC 380V |
|
6 Power |
10.0KW |
|
7 Machine Weight |
About 500KG |
