Home > Products > Industrial Supplies > Construction Machine

~Configuration options
1. According to customers' requirements, our truck mounted drilling rig can be equipped with air compressors from different manufacturers, like America's SULLAIR, Sweden's ATLAS COPCO, China's KaiShan Group and HongWuHuan Group. Thus, the equipment can achieve pneumatic down-the-hole hammer drilling.
2. If equipped with air water separator, dual-wall drill pipe and other related devices, the rotary drilling rig is also able to achieve reverse circulation drilling.
3. If equipped with drill tools like hydraulic down-the-hole hammer, and 850/2A mud pump, the vehicle mounted drilling equipment can realize hydraulic DTH drilling.
More design advantages
1. NYC-350ZY vehicle mounted drilling equipment is a rotary drilling rig.
2. The drilling rig is equipped with SINOTRUK special truck chassis, and the transfer case, main drive, gearbox, dual-winch, slurry pump, rotary table, drill tower and steel wire feeding system are all mounted on the chassis.
3. Power system
NYC-350ZY truck mounted drilling rigs are equipped with automotive engines, and also additionally equipped with transfer case and hydraulic system. Hence, the truck and the drilling mechanism can work simultaneously.
4. Three-phase AC generating set provides the vehicle mounted drilling machine with convenience for welding operation and equipment maintenance at night.
5. NYC-350ZY is equipped with dual-winch and drill tower pulley block, etc. which functions to increase the drilling pressure and assists the water well drilling rig in drilling into mud rock, and bed rock, etc. This design is very effective in improving drilling efficiency.
6. Driving system
This truck mounted drilling rig is principally mechanical driven. The drill tower and the four levelling legs are hydraulically controlled. The two mechanical legs, transfer case and slurry pump's valves are pneumatically controlled.
7. Power system
NYC-350ZY truck mounted drilling rigs are equipped with automotive engines, and also additionally equipped with transfer case and hydraulic system. Hence, the truck and the drilling mechanism can work simultaneously.
8. Drilling method
A standard NYC-350ZY truck mounted drilling rig adopts directional circulation drilling method. Equipped with BW850/2A slurry pump, it utilizes slurry as the drilling fluid, and finally achieves direct circulation drilling with the help of the high pressure plunger pump.
If equipped with proper drilling tools, the drilling machine can also achieve other drilling methods.
Applications
The rotary table of this truck mounted drilling rig comes with large torque and as a result the drill equipment makes a hole quickly. Currently, our drilling rig has found applications in water conservation projects, the drilling of industrial deep well, conventional water well and geothermal well, etc., and national defense fields, to name a few. It is applicable for drilling into clay, sand, bed rock, basalt strata, and more.
Standard configurations
Drilling depth (M) 300-350
Borehole diameter (mm)  500
Rotary table speed (r/min) 21.2; 36; 63.2; 100.6; 155; 20.2 (reverse)
Rotary table torque (KN.m) 18; 10.6; 6; 3.8; 2.5; 18.9 (reverse)
Pull force of the main winch (with single winch rope) (KN) 30
Max. pull force of the main winch (KN) 180
Pull force of the auxiliary hydraulic winch (with single winch rope) (KN) 40
Max. pull force of the auxiliary hydraulic winch (KN) 160
Elevating capacity of the hook (KN) 180
Carrying capacity of the drill tower (KN) 180
Drill tower height (mm) 11500
Load bearing capacity (t) 25
Drill stem Main drill stem (mm) 108×108×7500
 Second drill stem (mm) Ф89×10×5500
Hydraulic oil pump Model CB-HP50/32Z
 Capacity (ml/r) 50/32
 Rated speed (r/min) 2000
 Rated pressure (MPa) 20
BW850/2A slurry pump / mud pump Cylinder sleeve diameter (mm) 150
 Piston travel (mm) 180
 Theoretical flow rate (L/min) 600 850
 Rated pressure (Mpa) 3 2
 Stroke frequency (min-1) 58 82
 Suction pipe diameter (mm) 127
 Drain pipe diameter (mm) 64
 Rotation speed (r/min) 470
 Input power (kw) 40
 Overall dimension (mm) 2000×1030×1400
 Weight (t) 1.5
Matching power unit Diesel engine Model CA6DE3-20E3
  Rated power (KW) 147
  Speed (r/min) 2300
  Max. torque 650N.m/1400-1500rpm
Chassis Model TAZ5183TZJ (crane truck chassis)
 Drive type 6×4
 Engine Model and type CA6DE3-20E3 Euro III
  Rated power (KW) 147
  Rotation speed (r/min) 2300
 Overall dimension (L×W×H)(mm) 11110×2490×2500
Model in National Announcement of P.R.China TAZ5173TZJBZC350 water well drilling rig
Generating set Model MF
 Rated power (kw) 15
 Rated voltage (v) 400
 Rated current (A) 27
 Power factor 0.8
 Speed (r/min) 1500
 Rated frequency (Hz) 50
 Insulation class H
 Protection rating  IP21
Optimum gear of the gearbox in driving cab (rotation speed) 5th gear (1000-1400r/min)
Max. truck travel speed (Km/h) 75
Weight (kg) 19340
Transport dimensions (L×W×H) (mm) 12160*2490*3440
Overall dimension (L×W×H) (mm) 11110*2490*13110