NYC-400CA truck mounted drilling rig
Product Description
~Main features:
◎ NYC-400CA truck mounted drilling rig is designed by our engineers.It is a kind of truck mounted and rotary drilling rig.
◎ The truck chassis adopts the 8×4 special crane chassis of brand CHANA TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed mechanism are set up on the chassis.
◎ This rig is a rotary drilling rig with directional circulation. It is equipped with BW850/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
◎ The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulic system.
◎ We can install the spare electric engine and clutch implement according to client’s requirement, so that the rig can work with diesel engine or electric engine.
◎ We set up a generator (MF) which is convenient to illuminate or work at night.
◎ There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
◎ The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
◎ According to clent’s requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS,Sweden Atlas, China Kaishan,Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap,double-wall drilling pipe,gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with 850/20A mud pump; can carry out core-drilling with other special drilling tools.
◎ The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
Technical parameter
Drilling depth(M) 400
Drilling diameter(mm) 500
Speed of turntable(r/min) 117; 102; 60; 38; 22; 13; 14(reverse)
Torque of turntable(KN.m) 7.5------75
Single rope lifting capacity of main windlass(KN) 40
Maximum lifting capacity of main windlass(KN) 240
Single rope lifting capacity of assistant windlass(KN) 40
Maximum lifting capacity of assitant windlass(KN) 160
The lifting capacity of hook(KN) 250
Bearing capacity of drilling tower (KN) 250
The height of drilling tower (mm) 12500
Drill pipe Kelly bar(mm) 108×108×7500
Assistant pipe (mm) .Ф89×10×5500
BW850/2A
plunger pump
Diameter of cylinder (mm) 150
Stroke of piston (mm) 180
Theoreical flow (L / min) 600 850
Rated pressure (Mpa) 3 2
Pounding times (min-1) 58 82
Diameter of suction tube (mm) 127
Diameter of drain pipe (mm) 64
Input speed (r / min) 470
Input power (kw) 40
Overall dimensions (mm) 2000*1030*1400
Weight (t) 1.5
Truck chassis Drive form 8×4
Engine Model YC6A260-33YC water -cooled four strok diesel engine
Rated power(KW) 191
Speed (r/min) 2300
Size (L*W*H)(mm) 11510*2480*2800
Electric generator Model MF
Rated power (kw) 30
Rated voltage(v) 400
Rated current(A) 27
Speed (r/min) 1480
Frequency(Hz) 50
Protection level IP21
Insulation Class H
The highest speed(Km/h) 75
Weight (kg) 19340
Transport size(L*W*H)(mm) 12598x2480x3870
Working size(L*W*H)(mm) 11145x2480x13289
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,