Salt spray test, acetic acid salt spray test report,
Shenzhen one pass inspection technology Co., Ltd. (hereinafter referred to as TTS) is engaged in industrial and consumer products testing, inspection and verification, and third party impartiality of the professional inspection institutions. The laboratory has obtained the Chinese national accreditation Laboratory Accreditation (CNAS) * * *, the National Metrology Accreditation (CMA) * * * and international transportation safety certification (ISTA), the laboratory in accordance with international standards ISO/IEC17025:2005 "requirements" management and operation for the competence of testing and calibration laboratories, have issued inspection report to the social justice qualifications.
Environmental reliability test: 1. the climate environment includes: high temperature test, low temperature test, alternating temperature heat (temperature change 1-2 C /min), fast temperature cycling test (temperature change the fastest 20 DEG /min), temperature shock test, high temperature and high humidity test, damp heat test, low temperature and humidity test, high temperature and humidity test, salt corrosion test, IP rank test (IP1X-6X test, IPX1-X8 test and dustproof waterproof), low pressure test, pressure cooker test (HAST), artificial sweat test, gas corrosion test, thermal resistance welding, soldering, UL94 flame retardant test, UV aging test (Fluorescent UV lamps), solar radiation (xenon lamp test halogen lamp aging, etc.);
2. the mechanical environment includes: vibration test (random vibration, positive sweep vibration, constant frequency vibration), simulation of vapor transport vehicle transport test, impact test, mechanical shock test (Fang Bo, half sine, sawtooth), drop test, G value drop, drum drop test (0.5m and 1m), inclined plane impact test, stacking pressure test, horizontal compression test, temperature and humidity + three vibration comprehensive test and highly accelerated life test (HALT), highly accelerated stress screening (HASS, HASA), service life test (force, pullout), ball impact test, key life test, zoned life test, soft pressure test, swing test, pencil hardness test, abrasion test, adhesion test, 100 lattice test etc.;
3., the electrical performance includes: contact resistance, insulation resistance, voltage resistance, temperature rise test, and so on;
Salt fog test in detail: salt fog test is a salt spray test equipment created by artificial simulation salt fog environmental conditions to confirm the product or metal material corrosion resistance environmental test. The severity of the test depends on the duration of exposure.
Laboratory simulation of salt fog can be divided into three categories: neutral salt spray test, salt spray test, acetate copper accelerated acetic acid salt spray test.
(1) neutral salt spray test (NSS test) is the earliest and most widely used method of accelerated corrosion test at present. It uses 5% NaCl solution, and the pH of the solution is in neutral range (6.5 - 7.2) as a solution for spraying. The test temperature is 35 DEG C, and the sedimentation rate of salt fog is 1 ~ 2ml/80cm/h.
(2) acetic acid salt spray test (ASS test) is developed based on neutral salt spray test on. It is in 5% Sodium Chloride Solution add some glacial acetic acid, so that the pH value of the solution dropped to about 3, the solution becomes acidic, and finally formed salt fog also from neutral salt fog to acid. Its corrosion rate is about 3 times faster than that of NSS test.
(3) copper accelerated acetic acid salt spray test (CASS test) is a kind of rapid salt fog corrosion test abroad newly developed test, the temperature is 50 DEG C, adding a small amount of copper salt and copper salt solution, strongly induced corrosion. Its corrosion rate is about 8 times that of the NSS test.
(4) alternating salt fog test: reference test standards: GB/T 2423.17, GB/T2423.18, IEC60068-2-11, ISO4628-3, ASTM, B117, JIS-Z2371, JIS-G3141, GJB 150.1, MIL-STD-810F, MIL-STD-883E, etc.
