Home > Products > Industrial Supplies > Construction Machine

Italy design rolling shutter guardrail forming machine could be used to make shutter guardrail in batch fully automatic. The guardrail design is from Italy, when used together with the seal, it can remove noise when shutter moving. Vertical guides are formed from rolled steel or fabricated dependent on size and are supplied with appropriate angles for fixing to the structure here are some drawing profile and finished product pictures for your reference:

Rolling shutter guardrail rolling forming machine parameters and design for your reference:

Parameters of Italy design rolling shutter guardrail rolling forming machine:

a. Number of forming steps: 26 stations
B. Shaft material: 45# steel with quenched treatment, precision machined, The diameter: ￠50mm
c. Roller material: Cr12 Mov with quenched treatment
d.Transport: by gear
e. Forming speed: 25m/min
f . Motor: 18.5 kw
g. Voltage: 380v, 50Hz,3 phase or customize 
h. Structure: independent stand
i. Size of machine: 4.5m *0.8m *1.2m

How to use rolling shutter guardrail:

The rolling shutter guradrails length could be made according to the door height. In the PLC of machine, you can make any length shearing .