product description
AP16007 laser radar level gauge can use laser measurement method to measure the material level non-contact, not affected by material viscosity corrosion, etc., the protection level can reach IP67 can be used in a humid environment, the host has LCD display liquid level conditions can be freely placed on the easy Observing the position, the human-machine interface is more convenient to set up, this product has the function of distinguishing the stirrer, and can be used in the reactor crystallizer and other working conditions very reliably.
Application:
l Pharmaceutical production
l Plastic production, plastic high-risk areas
l Storage industry such as crude oil, refined oil measurement
l Cement and aggregates - raw materials, clinker silo, etc.
l Food Processing, Cereals, Seeds and Feed, Aggregate Industry
l Environmental and Recycling Industry, Polymer Reactor Vessels (High Pressure)
l Chemical processing, bio-energy, liquid asphalt, reactor vessel (vacuum), alloy polystyrene, nylon, polyvinyl chloride, etc.
l Pulp and paper, such as pulp slurry tanks, sealed water tanks, white water tanks, storage tanks, storage towers, bleach towers, etc.
l Mining, metallurgy, non-ferrous smelting
1 Security
1.1 Laser Level
1.1.1 Aiming Laser
The laser level gauge is provided with a visible laser and is emitted from the front of the instrument for aiming at the measured medium. The Visible Laser is a Class 2 laser, based on the following criteria:
·IEC60825-1:2001 "Radiation safety of laser products"
·EN60825-1:2001 "Radiation safety of laser products"
FDA 21 CFR Ch.I § 1040:2004 (US Department of Health and Human Services, Federal Regulations)
Secondary laser products:
Do not stare into the laser beam and do not aim at others if it is not necessary. The eye will instinctively protect the eyes by turning or blinking.
Laser wavelength: 635nm, <1mW, <15mm@5m
1.2 Warning
Do not open the instrument cover when the power is on. Only professional technicians can open the cover for operation, wiring, calibration and programming.
1.3 Measurement principle
The laser level gauge has a built-in visible laser aimed at the measured medium. A built-in high-precision high-resolution timing device measures the round-trip time between the infrared laser at the launch point and the measured medium. Then L = t * c / 2 (t is the round trip time, c Light speed). The laser level meter is a non-contact measurement. Since the laser can penetrate the glass, the laser level meter can be well protected and can be used for harsh environment measurement (high temperature, high pressure, high humidity, high dust). Since the laser emission angle is very low (<0.2°), the laser level meter can measure the narrow space level and can accurately measure the irregular surface.
The laser radar level gauge is placed inside a well-designed protective cover, making the laser radar level gauge available for harsh environment (high temperature, high pressure, high humidity, high dust) measurements. The well-designed protective cover makes the lidar level gauges installable in any environment and installed in any angle and manner.
1.4 Laser
Visible laser wavelength: 635nm, <1mW, <15mm@5m, used for sighting
Infrared laser wavelength: 905nm, <0.8mW, 1kHz, 10ns pulse for measurement
1.5 Measurement
Measuring range: 0.02m~100m (special customization up to 350m)
Resolution: 1mm
Absolute accuracy: ±1cm
1.6 output
Analog output: 4~20mA (three-wire system), load capacity >300Ω
1.7 Environment
Temperature: -55~150°C,
Storage temperature: -20~70°C.
Relative humidity: 10 to 95% RH,.
Altitude: 2000m.
Measured medium temperature: up to 2000°C.
Laser Level Meter Protection Level: IP67.
2 Power supply
Power supply: DC24V AC or DC power supply
Power consumption: 1W,
4.1 Calibration and Operation
Before calibrating the meter, make sure it is installed.
The zero, span, setting unit, container height, damping time, and display output can be adjusted by pressing the keys on the instrument panel.
