Home > Products > Industrial Supplies > Industrial Supplies Stocks

SSTPR04/SSTPR08Model Rivetless riveting machine

Rivetless riveting machine are joint two layers of several layers of metal board by punch or by roll press to made it formation into need, and becoming the work piece has the certain anti-pull strength and anti-share strength.

  Application scope: The rivetless riveting machine suitable for joint the steel plate, stainless plate, zinc and aluminum etc.

This kind of machine riveting joint function is strong, process stability has no rock, the surface are beautiful after process. It has plenty of adjustment function, the riveting pressure, riveting speed and feeding speed are all can be adjusted, to guarantee the best result effectively.

Characteristics:

1.Joint point are firm and credibility

2.Rivetless，low cost.

3.Match the pre-pressure device，overcoming distort badly.

4.Riveting time、pressure 、speed  are all can be adjusted.

5.National patent technology，number shows can accuracy to 0.1 second

6.Press gently ，the molding tool loss is small

7.Can transform into round or square

8.The riveting area has no stress

9.Can not break the plating or painting in surface

10.To the metals material request not high, the copper , aluminums, steel, zinc are all unlimited

11.Riveting process has no vibration、low noise、low consumption

12.Unnecessary to processing in before or after riveting joint, allow to have the mezzanine and multi-layer conjunction

13.Advanced counter and time shows window

14.The electricity control system's operating are convenience and safety

15.Can riveting different shapes after replaced the different die

16.Work environment good, there is no poisonous smoke of dust exhaust, have no noise

17.The operation simple and consume low

18.Can design for bench type, vertical or traveling

rivetless riveting machine
joint two layers of metal board by punch
Labor-saving
max pressure 7.4KN/T
max thick of board 2+2

1.Good quality after process and metal flown line are naturally, the pieces of layers are firm and smooth (can reach the Ral.25um).

2.Labor-saving and economy energy (pressure only 1/10-15 of the punch joint),the weight also lower.

3.It's unnecessary to match the boost cylinder equipment, therefore, the equipment's manufacturing cost more lowers

4.The national patent technology ,the time shows can be adjusted and accurate to 0.1 second.

5. Because of the gentle pressure, the molding tool to lower consumedly.

This kind of machine riveting joint function is strong, process stability has no rock, and the surface is beautiful after process. It has plenty of adjustment function, the riveting pressure; riveting speed and feeding speed are all can be adjusted, to guarantee the best result effectively.