Home > Products > Electronics & Electricity > Electronic Instrument > Test Bench

~Standard:GB 4208-2008(IEC 60529),GB2099.1(IEC 60884-1),GB4706.1(IEC 60335-1),GB7000.1 (IEC 60598-1) ,GB/T 4942.1-2006,GB/T 4942.2-1993,QC/T 413-2002.
Application: It is suitable for IPX5, IPX6 testing.
Sample: Such as electronic appliances, lamps, electrical cabinets, electrical components, automotive, motorcycle electrical products (such as automotive meters, various switches, micro-motors, etc.)
Structure and function: The main difference between the IPX3 and IPX4 handheld waterproof test is that the IPX4 needs to remove the balance baffle of the shower head, so that the shell is splashed in every possible direction. The device can be used with a sample rotating table.

Parameters：
Item Parameter
Power Single phase AC220V,50Hz
Water source The water flow rate is >10L/min±5%, The pressure is 50~150kpa, Clean, non-contaminating water, water cleaning filter.
Sprinkler parameters The outer diameter is Ф102mm. The spherical diameter is SФ75.5mm. There is 1 hole in the middle hole, 24 holes in the inner two holes with 30° angle, 96 holes in the outer four rings with 15°angle, a total of 121 holes. The aperture is Ф0.5mm,which is made of brass.
Water flow 10L/min±5%，Flow meter is adjustable
Pressure 50～150Kpa. Pressure gauge range 0～0.25Mpa
Moving baffle Detachable
Site requirements Dedicated IP waterproof test room. The ground needs to be flat, with lighting, good water and drainage function
Test time Manual control, at least 5min
Note: The flow meter and hose are optional and can be matched with the complete waterproof system.