| Model: | KE-1222A/B |
|---|---|
| Brand: | ShinEtsu |
| Origin: | Made In Japan |
| Category: | Chemicals / Adhesives & Sealants |
| Label: | KE-1222-A-B , RTV rubbers , KE-1222AB |
| Price: |
US $260
/ pc
|
| Min. Order: | 1 pc |
| Last Online:02 Dec, 2024 |
Two-component RTV rubbers for moldmaking
Two-component RTV silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV silicone rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.
Product Detail
Features
1、Workability
The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.
2、Mold-releasability
The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.
3、Dimensional stability
These rubbers offer good dimensional stability, with little shrinkage.
4、Flowability
They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.
5、Non-exothermic
No heat is generated during curing, meaning no adverse effects to the original.
Typical Products
| Application | Grade | Curing
method |
Before curing Appearance |
Features |
| General purpose | KE-12 | Condensation | White | Good working properties |
| KE-14 | Condensation | Grayish white | Good working properties | |
| KE-17 | Condensation | Grayish white | Good working properties | |
| For welder molding | KE-24 | Condensation | Grayish white | High hatrdness |
| KE-26 | Condensation | Grayish white | High hatrdness | |
|
High-strength condensation-cure type |
KE-1414 | Condensation | Grayish white |
Curing agent for skin-molding available |
| KE-1415 | Condensation | Grayish white | Hardness: 20 | |
| KE-1416 | Condensation | Grayish white | Hardness: 15 | |
| KE-1417 | Condensation | Grayish white |
Improves urethane resistance. Hardness: 30 |
|
|
High-strength addition-cure type |
KE-1300T | Addition | Translucent | |
| KE-1310ST | Addition | Translucent |
Improves urethane resistance |
|
| KE1314-2 | Addition | Translucent | Oil bleed | |
| KE-1316 | Addition | Translucent | Low viscosity, low hardness | |
| KE-1600 | Addition | Grayish white | High hardness | |
| KE-1603-A/B | Addition | Transparent |
High transparency, Mix ratio 1:1 |
|
| KE-1606 | Addition | Transparent |
High transparency, Mix ratio 10:1 |
|
| Other | KE-1222-A/B | Addition | A:Blue
B:Deep flesh tone |
Fast cure, Putty type |
| KE-1241 | Addition | Grayish white |
For printing on curved surfaces |
Silicone impression materials for high-precision moldmaking
| Application | Grade | Curing
method |
Before curing Appearance |
Features |
|
For nanoimprint lithography and printing blankets |
SIM-260 | Addition | Colorless,
transparent |
Standard cure type.
Standard hardness. |
| SIM-240 | Addition | Colorless,
transparent |
Standard cure type.
Low hardness. |
|
| SIM-360 | Addition | Colorless,
transparent |
Rapid cure type.
|
| Price Terms: | FOB HONGKONG,FOB SHENZHEN |
|---|---|
| Payment Terms: | TT |
