Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

OLT  AN5516 01 1OLT  AN5516 01 2OLT  AN5516 01 3OLT  AN5516 01 4OLT  AN5516 01 5
  • OLT  AN5516 01 1
  • OLT  AN5516 01 2
  • OLT  AN5516 01 3
  • OLT  AN5516 01 4
  • OLT  AN5516 01 5

OLT AN5516 01

Model:AN5516 01
Brand:VXAR
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:OLT , AN5516 01 , GPON
Price: -
Min. Order:-
Inquire Now

Member Information

Detail

Product Description

 

Original AN5516-01 GPON OLT equipment

 USD500-900

  1. Product  Description

AN5516 OLT equipment is a carrier-class 10 Gigabit PON Platform as central office equipment, which adopts industry-leading technology and supports full front card &front lines design, and high-density XPON port cards. In addition, it supports uplink interfaces on GE/10GE/STM-1/E1, which can be shared on the same platform with GPON/EPON/10G PON/P2P for sustainable evolution to make the network constructionmore effectively. Using high performance chips makes it cost effective, green and network reliable
    Large carrier-class central office equipment
    Super Access Ability
    High capacity and Density carrier-class 10 Gigabit platforms supporting 128 PON ports, switch card capacity of 976 G and backplane bus capacity of 3.52 T.
   Support 1*10GE+ 4*GE ,2*10GE+ 2*GE and 6*GE(optical or electrical)
   Support STM-1/E1 private uplink interface and Maximum up to 16×16GE downlink interfaces.
    It has capability to support split-ratio of 1:32/64/128 long haul transmission and CLASS C+ enabled optical module.
Multi-service Access
    Provide Internet, Voice, IPTV, CATV and TDM services.
    Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface.
    Support OSPF, VRRP and RIP L3 protocols.
    Common platform of EPON/GPON/10G PON/P2P for FTTX Smooth evolution.

High Reliability Optimization Design
Standard 19” inches cabinet supporting 16 service slots.
Full front card and front lines design.
Support hot plug for all cards and PON modules.
Support redundancy error-check protection for services, controller and uplink cards.
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection.

Green Energy
With high performance and low power consumption chip the overall power consumption is lower than the average industry level
8-level temperature control intelligent fan supporting free ports sleep mode and energy saving

Air pressure: 70 kPa - 106 kPa

ZTE ZXA10 C300 configuration:

1 AN5516-01 Chassis
2 HSWA control board
2 PWR DC Power board (We also selling 110V/220V To 48V )
2 GU6F Uplink board
1 FAN
Power cable & Accessories

Service boards:

8 ports 1G GPON board:GC8B

8 ports 1G EPON board:EC8B

16 ports 1G GPON board:GCOB

16 ports 1G EPON board:ECOB

 

 

 2.Product Features 

Unified platform architecture

Delivers integrated access for GPON, EPON, P2P, 10G-EPON, XG-PON1 and TWDM-PON, achieves initial investment protection and smooth evolution.

Excellent capability

Fully meets the high-bandwidth network requirements with high system integration, large backplane bandwidth, high-density service cards, and non-blocking switching capability.

Higher reliability and protection

Provides boards redundancy and hot swappable, supports type B and type C protection for PON downlink and RSTP/UAPS/ERPS/LACP for uplink.

Perfect clock/time synchronization

Provides BITS, 1PPS+ToD, IEEE 1588V2 and synchronous Ethernet to deliver comprehensive time and clock synchronization.

Powerful QoS control and TDM capability

Supports three-level H-QoS based on service provider, user and service, provides TDM service bearing with STM-4, STM-1, E1 and T1.

Eco-friendly design

Supports multiple ways to lower the power consumption and complies with the Europe CoC, RoHS standards.

 3.Product application

 

 

  •  

 FTTH Network  Application
The C300 supports the fiber to the home (FTTH) network application. It can be connected to the ONT in the user's house through the PON port or provide the P2P optical access service through the FE or GE port.

  •  FTTB Network Application
    The C300 supports the fiber to the building (FTTB) network application, and is connected to the ONU (MDU or ONT) that is deployed in the corridor through the PON port.
  • FTTC Network Application
    The C300 supports the fiber to the curb (FTTC) network application, connected to the ONU that is deployed at the curb through the PON port, or connected to the DSLAM that is deployed at the curb through the GE optical port.
  •  Centric Management for GE Remote Extended Subracks Networking
  •  Leased Line Service (Enterprise Access)
  •  Leased Line Service (Base Station Access)
  • 5.7 Copper Access Network Application
    The C300 supports multiple copper access modes such as ADSL2+, VDSL2, and SHDSL.
  • Voice Service Network Application
    The C300 supports the voice service network application. The C300 can function as an AG (Access Gateway) in the softswitch network to provide the voice service and transmit the voice service to the IMS network. In addition, C300 supports the TDM SHDSL access, which is applicable to reconstruction of the traditional voice network.  

4.Technique Parameter

 

AN5516-01

AN5516-06

AN5516-04

Overall performance

 

 

Core switching capacity

976G/bits

400G/bits

400G/bits

Backplane bus switching capacity

3.25TG/bits

432G/bits

80G/bits

Transmission distance

20KM

20KM

20KM

Splitting ratio

1:64

1:64

1:64

Core switching standby switchover time

<50ms

<50ms

<50ms

Uplink card standby switchover time

<50ms

<50ms

<50ms

Optical path protection switching time

<200ms

<200ms

<200ms

Operation temperature

0°C~+50°C

DBA

 

 

Minimum bandwidth allocation granularity

≤64kbit/s

≤64kbit/s

≤64kbit/s

Configurable minimum bandwidth

≤256kbit/s

≤256kbit/s

≤256kbit/s

Precision

±5%

±5%

±5%

 

 5.Order Guide

(1)AC  or Dc power

(2)1.25G uplink or 10G

(3)with what board

Service boards:

8 ports 1G GPON board:GC8B

8 ports 1G EPON board:EC8B

16 ports 1G GPON board:GCOB

16 ports 1G EPON board:ECOB

 

6.Package & Shipping

(1)Original & Standard Carton Package.
(2)As customers' requirement.

(3)Shipping:We have strong cooperation with DHL, TNT, UPS, FEDEX, EMS ,by sea or your own shipping agent

7.Payment Terms

We mainly support T/T bank transfer,Paypal and Western Union

8.After-sale Service

This device warranty is 1-3years. If the problem is caused by the user’s wrong operation or natural force majure, we will only be responsible for the maintenance and charge the appropriate material cost.
When the device has problem, please contact us immediately.

 Note: For users who disassemble and repair equipment wihtout our authorization, our company will not offer free warranty. Reasonable maintenance and materials costs will be collected.

9.Certificates

10.FAQ
1. What is your main products

 Our main products include:

A: Huawei,ZTE, Fiberhome l ONUs,OLTs,Business Board ,and Mini olt

B: CATV EDFA, 1550nm/1310nm optical transmitters, optical receivers, FTTH optical node, CATV amplifiers…

C: fiber optic accessories,like fast connectors,adapters,splitters,drop cable,patch cord...

2. Does your EPON/GPON OLT/ONU compatible with other brand onus?

  Yes, all our OLT/ONUs are with open protocol, it can compatible with all ONU/OLTs with open protocol 

3.  What is the standard of WIFI?

There are two antennas, one is external, the other one is internal. Integrated 802.11b/g/ 

4. Do you have dual band WIFI ONU? Do you have 802.11a/n/ac ONU?

   Yes, we can provide you Huawei/ZTE/Fiberhome  ONU with dual band WIFI.

5. Could you provide the whole solution for FTTH/FTTB and so on?

  Yes, we also provide all products (with competitive price.

6. Could you provide technical support?

  Yes, we have engineers provide technical support for 7*24 hours.

7. Could you OEM/ODM for us? Including the packing?

  Yes, of course. But it needs MOQ.

9. I dont have express account, could you calculate the freight for me?

  No problem, we have cooperated with many forwarders with competitive freights, no matter you want to ship by DHL/FedEx/TNT/UPS, or by air, by boat, we can meet your request.

10. Can we get a lower price? Any Discount?

 Yes, price is not a problem, everything could be negotiated based on the quantity.

11. What is your MOQ?

  No MOQ.

12. How about the Warranty?

1-3 year

13. What is the lead time of my order ?

Sample order 1-7work days; Bulk order 1-20 working days after receiving payment.

 

11.Contact Us

Zibo Xing Wei communication equipment Co., Ltd    

Mobile/whatsApp/weChat: +86-15305338423

Tel: +86-533-8408988

Skype: starshow8823@hotmail.com

Web: http://www.sdwstar.com/

Add: B1-29, Block B, Zhongguancun Science and Technology City, Xiliu Road, Zhangdian District, Zibo City, Shandong Province

 


Product Image

OLT  AN5516 01 1
Img 1
OLT  AN5516 01 2
Img 2
OLT  AN5516 01 3
Img 3
OLT  AN5516 01 4
Img 4
OLT  AN5516 01 5
Img 5

Send Inquiry to this Member

Zibo xingwei communication equipment co. LTD

B1-29, block B, zhongguancun science and technology city, xiliu road, zhangdian district, zibo city

Phone:
86-0533-8408988
Fax:
86-0533-8408988
Contact:
Xing Wei (The general manager)
Mobile:
15305338423

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers