Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

OLT MA5608 1OLT MA5608 2OLT MA5608 3
  • OLT MA5608 1
  • OLT MA5608 2
  • OLT MA5608 3

OLT MA5608

Model:MA5608
Brand:VXAR
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:OLT , MA5608 , MA5608 OLT
Price: -
Min. Order:-
Inquire Now

Member Information

Detail

Product Description

Original HUAWEI MA5608T G/EPON OLT   Optical Access Terminal Equipment FTTH

  1. Product  Description

The MA5608T is an integrated fiber-copper access device, and can serve as a mini-OLT or mini-DSLAM.

The MA5608T, if serving as a mini-OLT, supports GPON, 10G GPON, and P2P access modes. It can be installed at a residential district or a street side, which reduces the usage of ODN backbone optical cables, lowers the ODN deployment cost and difficulty, and minimizes the CO equipment room space.

The MA5608T, if serving as a mini-DSLAM, supports ADSL2+, VDSL2, SHDSL, and POTS access modes and provides Internet access, voice, and video services.

   The MA5608T has a strong adaptability to the environment and can be deployed quickly. In FTTx networks, the OLT is moved closer to the user side, which can save backbone optical cable resources. This solves the problem of a few users and long access distance, when FTTx services are applied in an area with a low population density.

  • Deployed at the remote end, including the base stations (BSs) and outdoor environments
  • 2 U high, and supports a maximum of two service boards
  • Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios
  • Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario

 2.Product Features 

Optical Access

  • Supports a split ratio of 1:128.
  • Support small form-factor pl able (SFP) optical module of Class B+ or Class C+ and XFP optical module, which can be used in different scenarios.
  • High-density 48 single-fiber bi-directional or 24 two-fiber bi-directional GE/FE P2P optical access is supported.
  • Supports the high-performance and large-capacity control board SCUH. In active/standby mode, SCUH supports 20 Gbit/s switching bandwidth for each slot. In load sharing mode, SCUH supports 40 Gbit/s switching bandwidth for each slot. And provides 960G switching capacity (doubles performance capacity), improving access user bandwidth.

Full Service Access

  • Supports the High-Performance Multicast Service. The device employs the multicast technology to provide IP video services, including live TV and QVoD, for carriers. By introducing the multicast technology, the network device can manage, control, and forward IP video services and thus meets carriers' requirements for provisioning IP video service.
  • The MA5608Thas completed its interoperability test with all mainstream NGN/IMSs.
  • Connection to the NGN/IMS network through SIP or H.248, implementing the VoIP service (including the voice, fax, and modem services).
  • The MA5608T supports reconstruction of traditional voice devices such as the N*64K private line device and ISDN PRI PBX, implementing the ALL IP architecture.
  • Implements base station access solution by using MA5608T (OLT)+MDU. And the MA5608T supports clock synchronization in the base station access scenario.
  • The MPLS PWE3 provides the E2E reliability and quality assurance for the service.

Integrated Capability of Access and Convergence

NE Convergence

  • The MA5608T features powerful access and convergence capability. In the downstream direction, it supports cascading to other devices through the GE or 10GE port. In the upstream direction, it supports connection to the IP/MPLS network through the GE or 10GE port. It also supports dual homing to the BRAS through direct connection.

Centric Management for GE Remote Extended Subracks in FTTB or FTTC Scenarios

  • The MA5600T/MA5603T supports the centric management for GE remote extended subracks in FTTB or FTTC scenarios so that the network features higher scalability. The GE remote extended subrack feature uses new technologies such as VDSL2 and vectoring on the copper line network to deploy ultra-broadband networks more conveniently and rapidly. 
  1. Product application

 

  •  https://download.huawei.com/mdl/imgDownload?uuid=32bf1319dc0e41e8a235da21e8554871.png
  • https://download.huawei.com/mdl/imgDownload?uuid=f408b4aeff7c4036934b47c0cddd5a3c.png

 FTTH Network  Application
The MA5608T supports the fiber to the home (FTTH) network application. It can be connected to the ONT in the user's house through the PON port or provide the P2P optical access service through the FE or GE port.

  •  FTTB Network Application
    The MA5608T supports the fiber to the building (FTTB) network application, and is connected to the ONU (MDU or ONT) that is deployed in the corridor through the PON port.
  • FTTC Network Application
    The MA5608T supports the fiber to the curb (FTTC) network application, connected to the ONU that is deployed at the curb through the PON port, or connected to the DSLAM that is deployed at the curb through the GE optical port.
  •  Centric Management for GE Remote Extended Subracks Networking
  •  Leased Line Service (Enterprise Access)
  •  Leased Line Service (Base Station Access)
  • 5.7 Copper Access Network Application
    The MA5608T supports multiple copper access modes such as ADSL2+, VDSL2, and SHDSL.
  • Voice Service Network Application
    The MA5608T supports the voice service network application. The MA5600T/MA5603T/MA5608T can function as an AG (Access Gateway) in the softswitch network to provide the voice service and transmit the voice service to the IMS network. In addition, the MA5608T supports the TDM SHDSL access, which is applicable to reconstruction of the traditional voice network.  
  1. Technique Parameter

This topic describes the physical and technical specifications of MA5680T/MA5683T/MA5608T series products.

Item

MA5680T (ETSI)

MA5680T (IEC)

MA5683T

MA5608T

Supported cabinet

Indoor cabinet: N63E-22, N66E-18

Outdoor cabinet: F01T500, F01D2000

Indoor cabinet: N66E-22

Outdoor cabinet: none

Indoor cabinet: N66E-18

Outdoor cabinet: F01T500, F01S300, F01T300

Indoor cabinet: N63E-22

Outdoor cabinet: F01S100, F01S200

Board configuration

2 slots for control boards

16 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

14 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

6 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

2 slots for service boards

1 or 2 slots for the power interface board.

Supported control board and its switching capacity

SCUN: 480 Gbit/s in active/standby mode or 960 Gbit/s in load-sharing mode

MCUD/MCUD1: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing mode

System Layer 2 packet forwarding rate

SCUN: 726 Mpps in active/standby mode or 1452 Mpps in load-sharing mode

MCUD/MCUD1: 190 Mpps in active/standby mode or 380 Mpps in load-sharing mode

Switching/Forwarding delay

Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs.

BER in full load

BER of a port when the port transmits data in full load < 10 e-7

System reliability specifications

System: redundant configuration.

System availability for the typical configuration: > 99.999%

Mean time between failures (MTBF): about 45 years.

NOTE:

Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the MA5600T/MA5603T/MA5608Tis only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers.

Maximum number of ADSL2+ ports in a subrack

1024

896

384

128

Maximum number of VDSL2 ports in a subrack

1024

896

384

128

Maximum number of EFM SHDSL ports in a subrack

512

448

192

64

Maximum number of TDM SHDSL ports in a subrack

256

224

96

32

Maximum number of POTS ports in a subrack

1024

896

384

128

Maximum number of ISDN BRA ports in a subrack

512

448

192

64

Maximum number of ISDN PRA ports in a subrack

64

64

64

64

Maximum number of GPON ports in a subrack

256

224

96

32

Maximum number of 10G GPON ports in a subrack

128

112

48

16

Maximum number of P2P FE ports in a subrack

768

672

288

96

Maximum number of P2P GE ports in a subrack

768

672

288

96

Maximum number of upstream ports (GE ports in the GIU slot) in a subrack

8

8

8

-

Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack

4

4

4

-

Maximum number of upstream ports (PON ports in the GIU slot) in a subrack

2 (in the active/standby mode)

2 (in the active/standby mode)

2

-

Maximum number of upstream ports (ports on the control board) in a subrack

SCUN: 8 x GE (in the load-sharing mode)

MCUD: 8 x GE (in the load-sharing mode)

MCUD1: 4 x GE + 4 x 10GE/GE (in the load-sharing mode)

Maximum number of extended subracks connected to a master subrack

32

32

32

-

Maximum number of ONUs supported by each subrack

  • For Layer 2 applications, the maximum number of ONUs supported by each subrack is determined based on the number of MAC addresses and service flows supported by the control board, as well as the number of MAC addresses and service flows planned for the ONUs.
  • For Layer 3 applications, the maximum number of ONUs supported by each subrack is determined based on the number of routes and ARP entries supported by the control board.

5.Order Guide

(1)AC  or dc power

(2)1.25G uplink(MUCD) or 10G uplink(MUCD1)

(3)one MUCD (MUCD1) or two MUCD(MUCD1)

(4)with what board

 

6.Package & Shipping

(1)Original & Standard Carton Package.
(2)As customers' requirement.

(3)Shipping:We have strong cooperation with DHL, TNT, UPS, FEDEX, EMS ,by sea or your own shipping agent

7.Payment Terms

We mainly support T/T bank transfer,Paypal and Western Union

8.After-sale Service

This device warranty is 1-3years. If the problem is caused by the user’s wrong operation or natural force majure, we will only be responsible for the maintenance and charge the appropriate material cost.
When the device has problem, please contact us immediately.

 Note: For users who disassemble and repair equipment wihtout our authorization, our company will not offer free warranty. Reasonable maintenance and materials costs will be collected.

9.Certificates

10.FAQ
1. What is your main products

 Our main products include:

A: Huawei,ZTE, Fiberhome l ONUs,OLTs,Business Board ,and Mini olt

B: CATV EDFA, 1550nm/1310nm optical transmitters, optical receivers, FTTH optical node, CATV amplifiers…

C: fiber optic accessories,like fast connectors,adapters,splitters,drop cable,patch cord...

2. Does your EPON/GPON OLT/ONU compatible with other brand onus?

  Yes, all our OLT/ONUs are with open protocol, it can compatible with all ONU/OLTs with open protocol 

3.  What is the standard of WIFI?

There are two antennas, one is external, the other one is internal. Integrated 802.11b/g/ 

4. Do you have dual band WIFI ONU? Do you have 802.11a/n/ac ONU?

   Yes, we can provide you Huawei/ZTE/Fiberhome  ONU with dual band WIFI.

5. Could you provide the whole solution for FTTH/FTTB and so on?

  Yes, we also provide all products (with competitive price.

6. Could you provide technical support?

  Yes, we have engineers provide technical support for 7*24 hours.

7. Could you OEM/ODM for us? Including the packing?

  Yes, of course. But it needs MOQ.

9. I dont have express account, could you calculate the freight for me?

  No problem, we have cooperated with many forwarders with competitive freights, no matter you want to ship by DHL/FedEx/TNT/UPS, or by air, by boat, we can meet your request.

10. Can we get a lower price? Any Discount?

 Yes, price is not a problem, everything could be negotiated based on the quantity.

11. What is your MOQ?

  No MOQ.

12. How about the Warranty?

1-3 year

13. What is the lead time of my order ?

Sample order 1-7work days; Bulk order 1-20 working days after receiving payment.

 

11.Contact Us

Zibo Xing Wei communication equipment Co., Ltd    

Mobile/whatsApp/weChat: +86-15305338423

Tel: +86-533-8408988

Skype: starshow8823@hotmail.com

Web: http://www.sdwstar.com/

Add: B1-29, Block B, Zhongguancun Science and Technology City, Xiliu Road, Zhangdian District, Zibo City, Shandong Province

 


Product Image

OLT MA5608 1
Img 1
OLT MA5608 2
Img 2
OLT MA5608 3
Img 3

Send Inquiry to this Member

Zibo xingwei communication equipment co. LTD

B1-29, block B, zhongguancun science and technology city, xiliu road, zhangdian district, zibo city

Phone:
86-0533-8408988
Fax:
86-0533-8408988
Contact:
Xing Wei (The general manager)
Mobile:
15305338423

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers