Home > Products > Industrial Supplies > Environment Protection Facilities > Sewerage

Chinese medicine slag press, Chinese medicine slag dewatering machine for environmental protection requirements Chinese medicine slag can not pollute the land, polluted water source needs to be dehydrated before burning or treatment.
First, the Chinese medicine slag press site map: (see cover image)
Second, the overview:
The increase of new Chinese medicines and new pharmaceutical factories has resulted in a large number of traditional Chinese medicine slags, which have brought urgent problems to manufacturers, society and the environment. The Chinese medicine slag is derived from the production of proprietary Chinese medicines, the production of raw materials, and the processing of Chinese herbal medicines. Processing, etc., especially the amount of dregs produced by the production of proprietary Chinese medicines accounts for 70% of the total. Traditional Chinese medicine dregs are generally wet materials, which are extremely perishable and smelly, and are more serious in summer. Due to its complex chemical composition, landfills easily contaminate groundwater. According to environmental protection requirements, many companies use dehydration, drying and combustion methods.
Third, the introduction:
The machine is double helix, and the pressing screw is opposite to the conveying spiral. It is suitable for pressing sweet sorghum, sweet sorghum, sea buckthorn fruit, sweet sorghum, spinach and other fruits and vegetables containing certain fiber. The pressing force of the traditional Chinese medicine slag is large and uniform during the operation of the press. The cone of the slag outlet is controlled by hydraulic device or spring and air pressure. Adjusting the above pressure can change the pressure effect on the Chinese medicine slag and adjust the juice rate. The effect is due to the Chinese medicine residue. There will be differences in the difference. The contact part with Chinese medicine slag is made of stainless steel. The machine consists of a frame, a transmission system, a feeding part, a juice extracting part, a spring (hydraulic system) and a shroud, and an electrical system. The pressing screw rotates together with the main shaft, and the Chinese medicine slag conveying screw sleeve rotates in the opposite direction with the pressing screw on the main shaft. The pressure spring can control the size of the Chinese medicine slag outlet, and the dry and wet slag can be controlled at any time according to requirements. 1.5 tons is chain drive, and the other models are gear transmission.
Fourth, the working principle:
The machine is a continuous press, the screw is driven by the reducer to drive the system, and the press screw is rotated by the key link together with the main shaft: the conveying screw sleeve rotates on the main shaft opposite to the press screw. There is a feeding box on the body: a filter plate is arranged in the box, and the traditional Chinese medicine slag is transported into the box, that is, some Chinese medicine slag juice flows into the juice hopper in the lower part of the body through the filter plate, and the Chinese medicine slag is conveyed by the spiral to the pressing spiral The slag juice of the traditional Chinese medicine squeezed by the screw is also discharged into the juice hopper through the sieve cylinder, and the tail of the main shaft is provided with a small sieve cylinder. The finally squeezed grape juice flows into the juice hopper from the cone-shaped juice tube through the small sieve cylinder, and is pressed. The Chinese medicine slag is discharged between the end of the sieve cylinder and the cone. The outer surface of the slag taper is equipped with a hydraulic cylinder or a spring device or a pneumatic device. The pressure regulating valve handle or the spring pressing device or the pneumatic pressing device on the rotary cylinder can obtain different pressing forces, that is, the wet and dry of the Chinese medicine residue. degree.
Fifth, technical parameters:

Production capacity: 1.5t/h 3t/h 5t/h 10t/h 20t//h
Spiral diameter: 260mm 350mm 420mm 500mm 620mm
Motor power: 7.5KW 7.5 KW 7.5 KW 11 KW 22 KW
Dimensions: 2000 × 750 × 1200 2900x700x1230 3500 × 1000 × 1480 3740 × 1104 × 1785 5200 × 1440 × 1500
Equipment weight: 800KG 1200 KG 2000 KG 2445 KG
Speed: 12 rev / min 9 rev / min 6 rev / min 6 rev / min 9 rev / min
Sixth, model map: (see cover image)
Seven, quality users;
Sinopharm Group Korla Branch, Jinzhou Pharmaceutical Co., Ltd., Chongqing Pharmaceutical Co., Ltd., etc.
Eight, characteristics:
1. Simple operation and convenient movement. The production method is continuous pressing.
2. The belt press that is cumbersome and easy to replace, and the filter press that cannot be continuously produced, the pressing force exceeds the belt press, dehydration
The rate is higher.
3, less wearing parts, continuous production basically no wearing parts, long time to seal the oil seal is easy to age.
4, 5 tons or more presses are equipped with small sieve cylinders, water in and out of the press layer, the extraction rate is higher.
5, 5 tons or more are equipped with hydraulic devices, and the cone plug pressure can be adjusted intuitively through the hydraulic gauge.
6. The structure of the press can be modified according to the requirements of the user's Chinese medicine residue to meet the needs of users. (Screen size, machine height, screen wall thickness)
, the length of the machine, the length of the spiral, the size of the power, etc. can all vary according to the requirements of traditional Chinese medicine slag)
The disadvantage is that it is a little troublesome to clean the work. The residual Chinese medicine residue in the sieve barrel needs manual labor and effort. If the customer needs to clean it frequently, it is recommended to order it.
Double-petal sieve bucket.
Nine, the main structure:
1. Rack: It is made of ordinary steel channel steel. It can also be made of 304 stainless steel channel steel or ordinary channel steel for stainless steel foreskin.
2. Motor: Adopt national standard or export national standard.
3, gear box and spindle: machining with steel castings.
4. Conveying spiral and pressing spiral, cast from stainless steel.
5, sieve cylinder: stainless steel plate eye welding or stainless steel T-shaped sieve cylinder.
6, cone plug: stainless steel foreskin.
7. Pressing device: spring compression or pneumatic compression or hydraulic compression device.
In short, the material contact part is made of 304 stainless steel material, and can also be modified according to user requirements.