Home > Products > Electronics & Electricity > Other Electrical & Electronic

LCP is a value of the thermal interface material. The material is made on the base of coating thermally conductive polymer on fiberglass silicone tape coated substrate for easy to process and assembly. The softness and high adhesive can be used in filling the air gap between the PC board and the radiator or metal case. And its high adhesive is suitable for low stress shock absorption. Single-sided stickiness and puncture resistance is an electrical insulation material for the use of filling cooling insulation for activities or with the needle irregular heaters. Also it can also be used for thermal conductive between high-voltage bare wire devices and heat sink.

Features & Benefits: 

• Only one side is sticky
• Enhanced anti-puncture, shear and tear resistance
• High fit, low-hardness gap filling material
• Strong electrical insulation

 Typical Applications:

• Power supply module
• Car battery pack
• Power conversion equipment
• Car equipment / charger
• Where heat is to be transmitted to a rack, chassis, or other heat sink

• Physical Properties:

  Test Item	Test Method	Unit	LCP100 Test Value	LCP150 Test Value
  Color	Visual	-	White&Pink	White&Pink
  Thickness	ASTM D374	mm	0.5~10	0.5~10
  Hardness	ASTM D2240	Shore 00	40~80	40~80
  Specific Gravity	ASTM D792	g/cm3	2.1	2.5
  Tensile Strength	ASTM D412	Mpa	2.5	2.5
  Elongation	ASTM D412	%	-	-
  Tear Strength	GBT 529-2008	KN/m	4.2	4.2
  Breakdown Voltage	ASTM D149	KV/mm	≥8	≥8
  Volume Resistivity	ASTM D257	Ω·cm	1×1013	6×1013
  Continuous Use Temp	EN344	℃	-40~150	-40~150
  Flame Rating	UL94	-	V-0	V-0
  Weight Loss	@150℃240H	%	≤0.5	≤0.5
  Dielectric Constant	ASTM D150	@1MHz	5.2	5.7
  Thermal Conductivity	ISO 22007-2	W/m·K	1.0	1.5

  Standard size：200mm×400mm，300mm×400mm；Customized size available; 

•  

  For more , please kindly feel free to contact rita(at)szutd.com