Home > Products > Electronics & Electricity > Other Electrical & Electronic

LCF series liquid gap filler is a two-component pre-formed thermal conductive material, which can react and cure under normal temperature or high temperature conditions to form soft and excellent thermal conductivity elastomer. It is shaped according to the shape of the structure and is equal to thermal silicone pad after curing completely. Mainly meets the requirements of low pressure and high compression modulus; Can realize automatic dispensing production with high efficiency; Good contact with electronics when assembled, maximize effective contact area and reduce the contact thermal resistance; Automatically fill the gap available, and the infinite compression feature is suitable for the heat dissipation modules or electronic components with large thickness variation.

Features & Benefits:  

• High thermal conductivity, low thermal resistance, excellent wettability   
• Low pressure to electronic components   
• Manageable raw material stock ,lower composite cost
• For vehicle electronic products   
• Can fill any uneven gaps   
• Automatic point dispensing available, any thickness or size available       
• High reliability, thermal conductive gel is equal to thermal conductive silicon pad after curing, no volatility.

Unlike adhesive glue, thermal conductive gel has weak adhesion 

Typical Applications:

• Communication equipment
• Power equipment
• Medical instrument
• New energy vehicle
• Filling any gap between friable component

and shell 

Physical Properties:

Packing instructions: two types: manual operation type and dispensing type packaging. 1.Manual operation type is generally divided into

50ML AB hose packaging (A/B each 25ML), suitable for one-hand operation; The dispensing gap filler packed in 400ML AB hose, it can also be

packed with A 10KG/barrel and B 10KG/barrel according to the dispenser.

Application process: Dispensing :Syringe match up mixed needle, starting from A contacts B in the mixing head, the gel will change as below:

after 5 minutes will appear higher viscosity, dry out in 10 minutes, the product will gradually, hardening but also be flexible within 3 hours,

showing as hardness rises to no longer change.

For more , please kindly feel free to contact rita(at)szutd.com