Home > Products > Electronics & Electricity > Electric Control System

The use of Danfoss EKE347 (EKC347) -080G5000 liquid level controller

The EKE 347 controller is specially used to adjust the liquid level:
• Barrel pump system
• Gas-liquid separator
• Intercooler
• Economizer
• Condenser
• Reservoir
The level sensor continuously detects the refrigerant level in the container and transmits the level signal to EKE 347. EKE 347 gives instructions after receiving the level signal, the control valve opens
Adjust the inlet / outlet flow in the container so that the liquid level is always within the allowable range.

Features of Danfoss EKE347 (EKC347) -080G5000 liquid level controller

■ Liquid level control
■ Liquid level alarm function
■ Relay output for upper liquid level, lower liquid level and alarm liquid level
Out
■ Provide a simple and convenient setup wizard for the first configuration
■ PI control
■ Low or high pressure side liquid level control
■ When the expansion valve AKV / A is used, the master / slave system can manage
Up to 3 stepped opening AKV / A valves
■ Manual control output
■ Ability to limit opening
■ On / off control by hysteresis
■ Three access levels and independent passwords are used in the programming menu
■ Ability to connect to other EKE 347 controllers
■ Ability to connect wired remote display
■ Provide bus connection required for external data transmission