| Model: | TS5505 |
|---|---|
| Brand: | Tensan |
| Origin: | Made In China |
| Category: | Chemicals / Adhesives & Sealants |
| Label: | silicone sealant , silicone adhesive , silicone compound |
| Price: |
US $1
/ pc
|
| Min. Order: | 100 pc |
| Last Online:17 Mar, 2021 |
Features & Benefits
TENSAN Thermally Conductive Silicone Sealant is thermally adhesive with heatsink and has good sealing strength.Thermally Conductive Silicone Sealant is mainly used for electronic industry to bond two items or fill gap and conduct the heat.
1.REACH, ROHS certified
2. MSDS for air/sea shipment
3.Non-corrosive to most metal material
4. Excellent thermal conductivity
5.Good resistance in change of hot and cold temp
6.Good Performance for insulation
Typical Properties
| Thermally Conductive Adhesive | |||||
| Property | Test Method | TS5505 | TS5505L | TS5505M | TS5505H |
| Color | Visual | White | White | Grey | White |
| Viscosity (KCPS) | Brookfield Viscometer | 60 | 60 | 60 | 60 |
| Specific Gravity (g/cc) | Helium Pycnomter | 2.0 | 2.2 | 2.6 | 2.9 |
| Operation time(mins) | / | 60 | 60 | 60 | 60 |
| Thermal Conductivity (w/m.k) | Hot Disk | 1.0 | 1.3 | 1.5 | 2.3 |
| Thermal Resistance@50psi | ASTM D5470 | 0.08 | 00.08 | 0.08 | 0.06 |
| Breakdown Voltage (KVac/mm) | ASTM D149 | >6 | >6 | >6 | >6 |
| Volume Resistivity (ohm-cm) | ASTM D257 | 5*1014 | 5*1014 | 5*1014 | 5*1014 |
| Dielectric Constant@1MHz | ASTM D150 | 6.0 | 6.0 | 6.0 | 6.0 |
| Hardness (Shore A) | ASTM D2440 | 65 | 70 | 80 | 86 |
| Elongation (%) | ASTM D142 | 180 | 170 | 150 | 110 |
| Shelf Life (Month) | / | 6 | 6 | 6 | 6 |
| Usage Temperature Range | / | -50~+200 | -50~+200 | -50~+200 | -50~+200 |
| Cure Condition | / | 24H | 24H | 24H | 24H |
| UL Flammabitily Rating | UL94 | V-0 | V-0 | V-0 | V-0 |
Data Sheet
| Property | Unit | TS8800 | TS8811 | TS8822 | TS8833 | TS8866 |
| One or Two Part | / | Two | Two | Two | Two | Two |
| Color | / | Grey/Black | Grey/Black | Grey/Black | Grey/Black | Grey/Black |
| Viscosity (Part A) | cP | 4500 | 3800 | 3500 | 3500 | 4500 |
| Viscosity (Part B) | cP | 3800 | 3600 | 3500 | 3200 | 3500 |
| Mix Ratio | / | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 |
| Viscosity (Mixed) | cP | 4500 | 3800 | 3500 | 3400 | 4200 |
| Thermal Conductivity | W/mk | 0.6 | 0.6 | 0.7 | 0.8 | 1.0 |
| Specific Gravity (Cured) | / | 1.8 | 1.58 | 1.6 | 1.7 | 1.9 |
| Working Time at 25°C (Pot Life-Minutes) | min | 30-60 | 30-60 | 30-60 | 30-60 | 30-60 |
| Cure Time at 25°C | hrs | 24 | 24 | 24 | 24 | 24 |
| Cure Time at 80°C | min | 25 | 25 | 25 | 25 | 25 |
| Durometer Shore A | / | 45 | 50 | 45 | 50 | 50 |
| Dielectric Strength | kv/mm | 18 | 24 | 24 | 24 | 22 |
| Volume Resistant | ohm*cm | 1.5*1015 | 1.5*1015 | 1.5*1015 | 1.5*1015 | 1.5*1015 |
| Dielectric Constant at 100Hz | / | 2.5 | 2.8 | 2.8 | 2.88 | 2.88 |
| UL 94Flame Classification | / | HB | V-1 | V-1 | V-0 | V-1 |
Typical Applications
This material is widely applied in electronics products like consumer electronics, power supply , lamp devices etc.
1. Used to replace thermal grease for CPU and its heat sink conductor
2.Used in SCR intellectualized control module and its radiator
3.Used to fill the gap between electronic module and radiator and make heat conduct
Packing Information
1. Hard plastic tube 100 ml
100 tubes / carton
2. Hard plastic tube 300 ml
24 tubes / carton
3. Hard plastic tube 2600ml
4 tubes / carton
4. Customized packing is acceptable
Storage and Validity
1.Keep away from children .
2.Stored in a cool, ventilated, dry place.
NOTES
1.This material is harmless under specific safe measures. But that doesn't mean some people are not allergic to it.
2.Take measures to protect our skin from touching the gel like wearing impervious rubber or plastic gloves and protect our eyes.
3.After using the material, we need to clean our skin with soap and warm water and avoid using the solvents.
4.Use disposable paper towel to rub our skin.
5. Keep ventilation in the work place.
FAQ
Q1: Do you provide samples?
A1: Yes,we can offer free samples. Just please pay the shipping fee.
Q2: Are you factory or trading company?
A3: No, we are a professional manufacturer for over 6 years.
Q3:Do you provide after sale service?
A3:Yes. We have professional teams to help you solve the problems.
Q4:What other products do you have?
A4:We have thermal grease,thermal pad,silicone potting,SMT red glue and so on.
