Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management 1
  • Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management 1

Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management

Model:-
Brand:-
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:Ethernet converter
Price: US $300 / pc
Min. Order:1 pc
Inquire Now

Member Information

Detail

Product Description

BD-FE1-4ETH-MM is Fast Ethernet over 1 or 2-port E1 protocol convertor. Ethernet traffic over E1 lines is transferred to the packet-switched network via the unit’s Fast Ethernet ports. The encapsulation method support HDLC/PPP-BCP(RFC3518)/GFP-F.

Specification

Features:

  • Built-in intelligent switch fabric and provide 4-port fast Ethernet
  • Support 2047 bytes frames
  • Up to 2K MAC address entries
  • Support IEEE802.1Q VLAN and QinQ double tagging
  • Support HDLC/PPP-BCP(RFC3518)/GFP-F encapsulation
  • Support E1 frame or un-frame application
  • Provide statistics for each E1 channel
  • Configure via CLI/Web/SNMP(v1/v2c)
  • Support software and firmware upgrade

E1 Interface

  • Line Rate:
  • framing: N*64Kbps,N=0~31; unframing: 2.048Mbps
  • Line Code : HDB3
  • Interface Standard: ITU-T G.703
  • E1 Impedance: 75Ω(unbalance) BNC connector and 120Ω(balance) RJ45 connector
  • Jitter tolerance : comply with G.823,  Output jitter < 0.05UI

Ethernet Interface

  • Number of Ports: 4
  • Type: 10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX crossover
  • Compliance: Relevant sections of IEEE 802.3
  • Max Frame Size : 2047 bytes
  • Connector and Electrical Cable Type: RJ-45 , Cat.5
  • Line Protection:Built-in 1.5 KV Magnetic Isolation Protection、 6KV/42Ω surge protection

Encapsulation Protocols

  • HDLC (compatible with RAD or RAISECOM’s products)
  • GFP-F(ITU-T G.8040, G.7041/Y.1303)
  • VCAT (ITU-T G.7043)
  • LCAS (ITU-T G.7042)
  • PPP/BCP(RFC 3518)

Internal Bridge

  • Number of VLANs : Up to 16
  • Compliance: Relevant sections of 802.1Q and QinQ double tagging
  • LAN Table:  Up to 2K MAC addresses (learned)

Management Ports

Console Port

Interface standard: RS-232

Connector: RJ-45

Data rate: 115.2 kbps

Power supply                        

working voltage range wide, good

anti-disturb and Isolation, work stable

option I – DC-48V,range DC-36V~DC-72C   

option II – AC220V,range AC165V~AC240V

Power Consumption:    <=5 Watts

Environment condition                  

Operating temperature:  0C~+50 C

Storage temperature:   -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension                  

  • 210mm(L)
  • 140mm(W)
  • 40mm(H)

Application

The device can be used in a point-to-point application or in a hub-and-spoke topology, operating opposite Grancom’s CS1200 series, MRS46xx series and third-party gateways.

Typical applications include:

  • Ethernet private Line/LAN services
  • IP DSLAM, cellular IP, and WiMAX base station backhauling
  • Interoffice or enterprise LAN connection.

 


Product Image

Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management 1
Img 1

Send Inquiry to this Member

Shanghai Baudcom Communication Device Co.,Ltd

519A,Building A,Lian ming Road 389,Min hang District , Shang hai City,China

Phone:
+86-21-37709251
Fax:
Contact:
Irene (clerk)
Mobile:
37709251

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers