Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

16E1 to Ethernet Converter 1
  • 16E1 to Ethernet Converter 1

16E1 to Ethernet Converter

Model:-
Brand:-
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:Ethernet Converter
Price: US $150 / pc
Min. Order:1 pc
Inquire Now

Member Information

Detail

Product Description

Description

Functions

Baudcom’s 16E1/Ethernet converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s. The converter adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate with other supplier’s products followed the same standard. The device not only provides perfect alarm/status indication for E1 and Ethernet interface, but also with senior management function such as Ethernet data traffic statistics etc. The device is with high integration, low power consumption, stable performance and easy to use.

Features

  • Realize Ethernet data transmission over 1~16E1
  • Support auto delete the fault E1 channels (BER more than 1E-6 or a serious warning LOS/AIS/LOF or the signal loop back); Auto-restore the use of E1 after eliminate the failure.
  •  For 16 E1 channels, the maximum tolerable time delay difference between any two can be up to 220ms. It will have an alarm for exceed the limit when the time delay difference over 220ms, meanwhile, business interrupt jitter tolerance, jitter transfer characteristics in the line with ITU-T G.823.
  • Provide 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard
  • Provide 1024 pieces MAC address table, 5 minutes aging time
  • Support frame length: minimum: 64 bytes, maximum: 1916 bytes.
  • Provide flux statistics for each Ethernet interface, such as the fault package number and total package number etc.
  • Provide PAUSE flux control function, can be equipped with network management.
  • Support trunk super terminal management or network management based on SNMP. (optional)

Specification

  E1 Interface
    
 Line Rate: 2.048Mbps±50ppm
     Line Code : HDB3
     Interface Standard: ITU-T G.703
     E1 Impedance: 75Ω(unbalance) 
     Connections : dual coax BNC 
     Jitter tolerance : finer than G.742 and G.823

10/100Base-T Interface

  Rate: 10/100M, full/duplex auto-negotiation

  Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)

  MAC Address Entiries: 4096 Entiries

  Total Memory Sizes: 64MBits SDRAM

  Physical interface: RJ45, support AUTO-MDIX

Power supply                        

  working voltage range wide, good

  anti-disturb and Isolation, work stable

  DC-48V,range DC-36V~DC-72C   

  AC220V,range AC165V~AC240V

environment condition                  

  Operating temperature:  0C~+50 C

  Storage temperature:   -20 C~+70 C

  Relative temperature:95% (uncondensed)


Product Image

16E1 to Ethernet Converter 1
Img 1

Send Inquiry to this Member

Shanghai Baudcom Communication Device Co.,Ltd

519A,Building A,Lian ming Road 389,Min hang District , Shang hai City,China

Phone:
+86-21-37709251
Fax:
Contact:
Irene (clerk)
Mobile:
37709251

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers