Home > Products > Industrial Supplies > Industrial Supplies Stocks

MoSi2 High Temperature Heating Element 1800 ℃ U UL Shape

Description

MoSi2 High Temperature Heating Element 1800 ℃ U UL Shape

MoSi2 Heating Element Specification

• Spark MS18L MoSi2 Heating Element
• High temperature MoSi2 heating element for various electric furnaces.
• Max. working temperature 1730℃ ( 3346°F )
• Compact protective layer of quartz glass
• Long life combined with ease of replacing failed elements contributes to a high degree of utilization of the furnace and low maintenance costs.

Installation of MoSi2 Heating Element

) Vertically hanging
Under normal temperature, MoSi2 element is very brittleness, while under high temperature, it is plasticity, so the better way to install U Shape element is to hang it vertically from the furnace top through the support clamping chuck. The aim of such way is to avoid putting the mechanical stress directly to the element heat-generating end; otherwise the element will easily be broken.

2) Support clamp
Support clamp are applied to 9/18 and 6/12 two kinds of elements respectively. The support clamp supports the whole weight of the element and the position of the element is also determined by it, therefore, it must be installed carefully to assure the element vertically hung. In order to prevent the element from being over heated locally, the taper part of the element lower end must put into the furnace chamber.

MoSi2 Heating Element Physical Properties:

Indicators in Different Atmospheres

Following should be provided when ordering L Type or Bent 90° MoSi2 Heating Elements:

• Grade: 1700, 1800
• Diameter of Cold Zone / Hot Zone: c/d, in/in or mm/mm
• Length of Hot Zone: Le*, in. or mm
• Length of Code Zone: Lu*, in. or mm (Lu includes l, k and m as in the drawing below)
• Shank Spacing: a*, in. or mm
• Specify Le, Lu, and a with the same units (e.g. all as in. or mm).

Examples:
Grade 1800, d=6mm, c=12mm, Le=950mm, Lu=650mm, a=50mm
Specify as: MS18L, 6/12x950x650x50mm

Detailed Specifications:

Advantage

• Elements have the capabilities to resistance to oxidation and automatically repair, suitable for continued using in any kinds of oxidizing atmospheres.
• Elements are shaped in hot-working process, which keeps the base material in good tenacity and plasticity at high temperatures. The geometrical figure, standard and dimension is canonical, may produce any special shape and any dimension to meet the customer requirement.
• Because of the special technology, welding spot is fast and shock resistance, which dramatically reduced the damaged probability of welding spot by electric current, as well as transit and installation.

Note: For inquiry, it is better to provide a drawing of the element and specify the element diameters in millimeters. For example, an element with a (d) diameter of 9 mm and a (c) diameter of 18 mm is often referred to as a 9/18 element. Other dimensions may be specified in millimeters or inches. 

Tag:

Oxidizing Atmosphere MoSi2 Heating Element,

1700c MoSi2 Heating Element,

molybdenum disilicide heating elements