| Model: | HMCCT2493 |
|---|---|
| Brand: | HarmonyWOLRD/OEM/ODM |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Test Bench |
| Label: | Salt Spray TestER , Corrosion tester , Environment Chamber |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:13 Aug, 2024 |
The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil; in order to analyze the samples under specific environmental conditions and evaluation.
SPECIFICATION
| Model | HMCCT1603 | HMCCT2493 |
| Internal size | 135x95x125(WxDxH)cm | 210x95x125(WxDxH)cm |
| External size | 166X95X158(WxDxH)cm | 296X125X182(WxDxH)cm |
| Power supply | AC1ø 220V 20A 50HZ | AC 380V 25A 50HZ |
| Test box interior | Use GRP as a whole, thickness 5mm. Temperature-resistant can reach -40~120ºC. Make our equipment use the CASSI ACSSU NSS test for a long time without deformation. | |
| Thermostatic case | Use GRP and PVC grey heat-resistant impact plate, PVC board function is to Protection and Beautification. | |
| Chamber upper cover | Use GRP as a whole, thickness 5mm, Temperature-resistant can reach -40~120ºC. Make our equipment use CASS, ACSS, NSS tests for a long time without deformation. Enhanced Security window set and pneumatic cylinder left and right one group (automatic opening and closing). | |
| Test refill drum | Use PP whiteboard, volume 100L, independent. | |
| Test chamber basket frame | Using GRP heat resistant Corner. Setting product test angle 20°±5°, customizable test supports. | |
| Saturated air drum | Made of SUS#304 stainless steel sheet, thickness 2mm. With an automatic water level controller, avoid the inconvenience of manual water addition. | |
| Use temperature | According to the standards of CNS, JIS, ASTM adjustable conversion times of 30 min and 15 min. | |
| Salt water test method | Test room : 35ºC±1ºC;Saturated air drum: 47ºC±1ºC | |
| Corrosion resistance test method | Test room: 50ºC±1ºC; Saturated air drum:47ºC±1ºC | |
| Drying test | Chamber temperature:40ºC~80ºC±0.5; Chamber humidity:30± 5%RH and nature humidity | |
| Constant temperature and humidity test: Chamber temperature | 5ºC~85ºC±2; Cooling time: 60~5ºC about 30
min; Heating time: 5~85ºC about 30 min; Temperature deviation: ±2ºC; Humidity: 30%-98±5%RH |
|
| Sprinkler test (optional) | Use automatic pressurized spray saltwater or pure water(according to customer
requirements), automatic discharge outdoor after test over, customized on request. |
|
| Humid- heat test | GB2423.3-93Basic environmental test rules for electrical and electronic products
Test Ca: constant humid-heat test method. (Just satisfied specified temperature and humidity test) |
|
| Payment Terms: | TT / LC |
|---|---|
