Home > Products > Industrial Supplies > Farm Machines Tools

PTO Shaft Replacement Of Weasler 44 Series 1
  • PTO Shaft Replacement Of Weasler 44 Series 1

PTO Shaft Replacement Of Weasler 44 Series

Model:-
Brand:Ever-power
Origin:Made In China
Category:Industrial Supplies / Farm Machines Tools
Label:pto shaft , pto drive shaft , tractor pto shaft
Price: -
Min. Order:-
Inquire Now

Member Information

Detail

Product Description

PTO Shaft Replacement Of Weasler 44 Series

Our ever-growing power line offers an extensive selection of components that fall into the following categories:
Power take-off shaft and other components: required to maximize the performance of power output that the device can provide.
Connecting rods for Tractors: we have various 5-stage and 8-stage locking and T-handle hitch pins along with round snap, square, and round lock pins.
Camera systems: use our camera observation system to increase productivity, visibility, and security in the workplace.
Spray and other parts Choose from the essential spray parts from various drum pumps, as well as top manufacturers like The Jet Delavan crops care and many more.
Transmission of power: you can find numerous Carlyle V-belts that can transfer energy from the motor of your machine to the other components of the equipment.

Specifications Of 44 Series PTO shaft

Bore 1 1.37 inches 35 millimeters
Bore 1 1 3/8-6 SPLINE
Bore 2 Minus End Yoke
Compressed (Closed) Length 38.00 inches 965 millimeters
Compressed Overall Length 47.94 inches 1218 mm
Connection 1 Quickly DISCONNECT
Connection 2 YOKE Arms
Extended Length 61.75 inches 1568 millimeters
Extended Overall Length 71.69 inches 1821 mm
HP@1000RPM 119 HP 89 Kilowatts
HP@540RPM 77 HP 57 Kilowatts
Length 47.94 inches 1218 mm
Outside Diameter 7.28 inches 185 millimeters
Dimensions of Shipping 45" L and 7.28" H 45" L x 7.28" H 7.28" W 114cm L x 18cmH x 18cm W
Shipping Volume 2384.93 in3 39082 cm3
Shipping Weight 50.00 pounds 23 kilograms
Weight 50.00 pounds 23 kilograms

Weasler 44 Series PTO Shaft Parts

       
Tractor Yoke Cross and Bearing Kit Shaft Shaft Weld Yoke
       
Slip Sleeve Tube Tube Weld Yoke Implement Yoke
       
Yoke & Shaft Assembly Yoke & Tube Assembly Drivelines Guard & Guard Bearing

PTO Shaft Application

Sizing a PTO Shaft

If you are buying a new machine that comes with an PTO shaft, or actually replacing one that is old or replacing an old one, the majority of PTO shafts require to be cut in order to fit the length of both the tractor as well as the machine which is using it. This is the easy procedure that we will outline in the following steps.
Connect the tractor and the implement three-point linkage but do not connect to the PTO.
In order to determine how long the needed PTO shaft It is essential to determine what distance is between the groove of the tractor's PTO output shaft as well as the PTO output shaft.
When you have completed this measurement generally s est taking an additional 75mm off the PTO shaft to act as buffer to make it easier to connection. If there's no buffer, it could allow for any movement and could end up damaging an universal joint located on PTO shaft, or even damage the tractor or implement.
For a better understanding our explanation, we'll employ the following example:
Length of the brand new PTO shaft is 1000mm length from tail to head.
Distance between the tractor's output shaft and the implement's output shaft is 800mm.
Additional buffer = 75mm
So, to achieve our measurements we must perform the following actions:
PTO shaft length is The distance that separates the tractor from the the +75mm buffer.
It is important to remove 1000mm - 800mm+75mm=275mm the PTO shaft.
The most efficient method to cut the PTO shaft to the right size is to split it in two pieces so that there are both internal and external parts. The plastic cover doesn't require removal. In the above scenario the cover needs to be removed 275mm from the length therefore we must remove 275mm as well as 275mm off the cover in the plastic and steel pipe both inside and outside inside the PTO shaft. The first step is to measure the desired amount on the cover of the power take-off, make a note of it and then cut off any excess. Next, measure the amount you need out of steel pipe, and cut it using an angle grinder or hacksaw. Repeat the steps for the second portion of the PTO shaft.
You must ensure that all burrs have been taken off of the cutting side of the PTO shaft in order for the PTO slide smoothly. It is also recommended to apply some grease on each side of the PTO before reassembling. After you have reassembled your PTO shaft it is then linked to the tractor and the implements.

PTO Shaft for Agricultural Gearboxes

It is the agriculture gearbox and the PTO shaft are two key tractor components that function together to transfer power. The PTO shaft rotates at speeds of 540 up to 1000 rpm. Axles connect to the agriculture gearbox to the PTO shaft on both ends. Depending on the purpose they might have a lower or higher torque rating. As a reputable agricultural machinery parts provider, we provide a variety of PTO shafts available for sale. Contact us now for more information!

If you also need the agricultural gearboxes, click here:https://hzpt.com/agricultural-pto-gearbox/

 

PTO Shaft Manufacturer

Ever power , an engineering firm that combines the art of precision casting and precision forging and the machining. The company owns greater than 100 different sets of equipment , such as turning, milling grinding, planning, drawing numerical control cast line, medium-frequency electric furnace 1000-ton friction press, coating line, and so on. The company produces mainly agriculture machinery, universal joint assemblies Transmission shaft assembly agriculture machinery transmission shaft agricultural transmission shaft Plow shaft assembly and spline shaft precise castings and die forgings and various other products. The range of products includes more than 100 different varieties of 11 series, which include pulpers, rotary cultivators, lawnmowers, field returning machines and more. The company produces an annual production that is 120000 units of universal agricultural machinery joint assemblies, 4000 tonnes of precise castings and 4000 tonnes of die-forgings. The company is committed to the company's ethos of "people-oriented co-operation, unity, and excellence". In accordance with the corporate principle that is "quality results, honest and trustworthiness, customers first". Develop the business policy of "taking customer requirements as the main goal" to provide a friendly customer service. We look to working with both old and new customers to develop together!


Payment Terms:TT/LC/DP/DA

Product Image

PTO Shaft Replacement Of Weasler 44 Series 1
Img 1

Send Inquiry to this Member

HangZhou Ever-Power Transmission Co., Ltd.

No.789 Shenhua Road, Hangzhou, Zhejiang,

Phone:
05718-87870085
Fax:
Contact:
Alan (CEO)
Mobile:
13083988828

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Farm Machines Tools Made In China Products

,  

Farm Machines Tools China Suppliers and China Manufacturers