Home > Products > Electronics & Electricity > Electronic Instrument > Analysis Instrument

DRL-III ,Thermal conductivity tester(heat flow method)

Overview

This instrument is mainly used for testing thermal insulation、 the contact thermal insulation of solid interface and thermal conductivity of thin materials, such as aluminum panels, solid electrical insulation materials, thermal conductivity of resin, ceramic and so on。Detection of solid sheet of material，Can be detected powder materials and paste materials with a sample frame . Instrument Reference Standard: MIL-I-49456A、GB 5598-85 Thermal conductivity of beryllium oxide ceramic Determination、ASTM D 5470 – 12 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials。

Instrument Features: Automatic pressure, automatic thickness measurement, automatic control experiments. use 6-point temperature gradient detection, improve test accuracy. Can detect the thermal insulation curve under different pressure, Use an optimization mathematical model to test the thermal insulation、 contact thermal insulation of solid interface and thermal conductivity

The instrument is used in material thermal testing widely, used in production, quality inspection departments, colleges, universities and research institutes.

The main technical performance:

• The sample size：Φ30mm，
• The Sample thickness：0.02-20mm，
• Hot-pole temperature range: room temperature - 99.99 ℃;   
• Cold-pole temperature range：0-99.0℃，
• Thermal conductivity test range：0.10～45 W/m*k，
• Thermal insulation test range：0.05～0.000005m2*K/W，
• Pressure measuring range：0～1000N，
• Displacement measuring range：0～40.00mm，
• The accuracy：better than ± 3%;
• experimental methods：

a、Thermal insulation test of the specimen under different pressure。 

b、Thermal conductivity test。

c、Contact thermal insulation test

• Connect the computer automated testing and data printouts.
• Voltage: 220V，50HZ。

Instrument configuration: DRL-III thermal conductivity tester 1 set, English test software (including communication interface) 1 set, thermostat and its controller 1 set, English system desktop computer 1set.

Packing: DRL-III host: packing size 750*630*1740mm, Gross weight 160 kg;

Constant temperature water tank: packing size: 470*400*880mm, Gross weight 35 kg.