Generator Control Unit Genset Controller
Product Description
The GCU-10 Generator Control Unit is an universal economical programmable genset controller. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-10R (12V/24V) and GCU-11R (12V/24V) helps to simplify the wiring and connection process.
Features
- Microprocessor Based Design
- Universal LED Graphic Interface, Displays Generator Status and Failures
- Modular Design, Quick Installation
- Programmable Engine & Generator Controls Adapts Easily To Any Type Generator Set.
- Waterproof Front Panel With UV Protection
- Provide IDLE control For Elec. Governors
- Five Adjustable Time Delay Potentiometers
- Five DIP Switches For Specification Setting
Specifications
DC Supply |
9.0 to 36 VDC |
Alternator Input Range |
Voltage 5~300 VDC
Frequency 50~60 Hz |
Fuel Solenoid Signal Output |
5Amp @ 12/24 VDC |
Start Signal Output |
5Amp @ 12/24 VDC |
Warm up Signal Output |
5Amp @ 12/24 VDC |
Accessory " ON " Output |
5Amp @ 12/24 VDC |
Idle Control Conductor Capacity |
5Amp @ 12/24 VDC |
Power Consumption |
Under 3 VA on Auto |
Adjustable Timers |
- Engine Pre-Heat : 2~30 sec.
- Starter Cranking Time : 1~15 sec.
- Energize to STOP : 1~15 sec.
- Engine Idle (Governor) : 0~300 sec.
- Engine Cool-down : 0~300 sec.
|
Protection & Alarm Status Indicators |
- Start Failure
- High Water Temperature
- Low Oil Pressure
- Overspeed
- Underspeed
- Emergency Stop
- Extra Prog. Input
- Low Battery Voltage
|
Environment |
- Operation Temperature : -20~70 °C
- Relative Humidity : Maximum 90%
|
Panel Installation Cut-Out |
66.0 ± 0.5 mm x 66.0 ± 0.5 mm |
Weight |
100 gram |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,