Automatic Mains Failure Control & Protection Module
Product Description
The AMF-10 is an universal Automatic Mains Failure Control & Protection Module. It is a control and protection module for the generator and a monitoring controller for the Automatic Transfer Switch. The modularity design with easy to read high illuminant LED display, universal warning symbols and easy to operate interface, all functions settings can be programmed directly from the front panel. Optional AMF-10R universal AMF Controller Interface Module (relay module) is available for the AMF-10 to simplify the wiring and connection process.
Features
- Micro-Processor Auto Control & Protection
- Easy to Read High Light LED Display
- Modularity Design, Easy to Install
- Compact Size with Vibration Protected
- Waterproof Front Panel With IP65
- Provide Full Mains and Genset Alarms Signals shutdowns
- All Functions Setting Can be Done Directly On AMF-10 No Need For PC Connection (Customized settings are auto-saved into memory and will remain even when power is off)
- Universal LED Graphic Interface, Displays ATS and Genset Status and Failures
Specifications
Power Input |
Voltage 9~36 VDC (12V , 24V) |
Sensing Input |
Voltage 15~510 VAC
Frequency 50/60 Hz |
Rated Output Capacity |
DC 10Amps @ 12/24 VDC
AC 8Amps @ 250 VAC |
CT Secondary RatedAmps |
5A |
CT Specifications |
Burden 2.5VA |
Power Dissipating |
Max. 7 Watt |
Max. Vibration |
5~25 Hz , ± 1.6 mm , 25~100 Hz , a=4g |
4 Digit 7 Segment Easy-to-Read LED Display |
- Programmable Display with 3 Phase Volts,Amp & Freq.
- Engine Operation Hours & Battery Voltage Display
- Internal Program Settings & Status
- Failure Signal Status By Graphic Display
|
Protection & Alarm Status |
- Engine Start Failure
- High Coolant Temperature.
- Engine Over Speed
- Abnormal AC Voltage
- Low Fuel Level
- Maintain Service Alarm
- Emergency Stop
- Low Oil Pressure
- Engine Under Speed
- Generator Over Load
- Abnormal Battery Voltage
- Programmable Alarm
|
Environment |
- Operation Temperature : -20~70 °C
- Relative Humidity : Maximum 95%
|
Panel Installation Cut-Out |
137.0(L) x 137.0(W) ± 0.5 mm |
Weight |
610 g ± 2% |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,