Home > Products > Electronics & Electricity > Other Electrical & Electronic

AW-1 (Medium) infant radiant warmer

Brief introduction of infant radiant warmer:

--Microprocessor based servo controlled temperature system.

--The microprocessor-controlled unit allows for three settings: pre-warm, manual or automatic.

--Alarm functions for safety of infant radiant warmer includes:

　　 Power failure;

　　 Temperature deviation;

     Temperature sensor failure;

　　 Over temperature;

--APGAR timer to record therapy time

--Convenient X-ray cassette under infant bed

--Heater head of infant radiant warmer can be adjusted + 90ºhorizontally

--Tilt angle of infant bed is adjustable

--Observe light angle is adjustable

--Transparent protector folded in infant radiant warmer

--Adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source, the heating is quick and life-span is long

--Alarms are audible and visual in infant radiant warmer

--A second thermal cut-out function for more safety

--Skin temperature sensor failure protect function avoid over temperature in infant radiant warmer

--Temperature deviation can be amended in front panel of infant radiant warmer directly

--LED phototherapy unit

Standard configuration of infant radiant warmer:

　Main body (including the radiant source, control system, infant bed, bracket), X-ray cassette , Observe light , I.V.pole, skin temperature sensor, tray, mattress, transparent protector, castors.LED phototherapy unit.

Optional parts of infant radiant warmer:

　Drawer;

　RS-232(485) connector;

Technical data of infant radiant warmer:

　1.Power supply : 110/220V   60/50Hz

　2. Power input: ≤1200VA

　3. Operating condition:

　　　An ambient Temperature:18°C-30°C

　　　An ambient Relative Humidity: 30%--75%RH

　　　Atmospheric Pressure: 700～1060 hPa

　　　An ambient Air Velocity ＜0.3m/s

　4. Temperature control: 32°C～38°C

　5.Temperature control accuracy: ≤0.5°C

　6.Mattress temperature uniformity : ＜2°C

　7.Skin temperature sensor accuracy: + 0.3°C

　8.Warm-up time: ≤30min

　9. Infant Bed tilt angle:+ 10°

　10.APGAR timer range: ≤24h

　11.Heater head horizontal: ±90°

　12.Mattress size: 67cm×54cm

　13.Distance from heater to mattress: 80cm

　14.LED phototherapy light: 2pcs × 8W

Transport and storage:

　Environment Temperature:-40°C~ +55°C

　Environment Relative Humidity: ≤95%

　Atmospheric Pressure: 500～1060hPa

Package:

　Each unit is packed one case

　　Size:120cm×80cm×95cm

　　Gross weight: ≤100kg