Model: | FCRG-2 |
---|---|
Brand: | NDW |
Origin: | Made In China |
Category: | Electronics & Electricity / Power Transmission Equipment & Transformer |
Label: | wall bushing , bushing , insulating bushing |
Price: |
US $540
/ pc
|
Min. Order: | 10 pc |
Last Online:13 Mar, 2012 |
The FCRG-2 Dry-type Capacitive Wall Bushing made by Beijing Nobbel Electrical Tech Develop Co., Ltd. is used for enabling the high voltage conductor to pass through a wall or a floor, and insulating the conductor from them. It is usually used in a indoor power station etc.
The FCRG-2 Dry-type Capacitive Wall Bushing is different from other similar products at home and abroad. With reasonable design, novelty structure, aesthetic configuration and silicon rubber outer insulation sleeve umbrella group, the wall bushing has no oil, no ceramic, no gas, is convenient for operation and maintenance.
1. Advantages:
1. Dry-type insulation
2. No oilfilling, no gasfilling, no ceramic
3. High ability of antipollution
4. Easy operation and maintenance
2. Type
FCRG 2 L 1 / 2
F: organic composite insulation
C: wall bushing
R: capacitive insulation
G: dry-type and silicon rubber
2: Serial no
L: with CT (busbar-type Current transformer)
1: rated voltage, kV
2: rated current, A
3. service conditions
Ambient air temperature: –50 centigrade ~ +50 centigrade
The altitude ≤1000m,if higher,amend according to IEC 60137
The creepage ratio20mm/kV, 25mm/kV or 31mm/kV
4. Technical indexes
Rated voltage ( Ur ): 33kV, 52kV, 72.5kV, 123kV, 145kV, 170kV, 245kV
Rated current ( Ir ): ≤4000A
Partial discharge: ≤5pC
Dielectric dissipation factor: ≤0.004
Ith: 25Ir
All parameters are in accordance with IEC 60137