5 Axis CNC Machining Center,SH-TC1
Product Description
| 5-axis Cnc Machining Center |
| 1. Equipment Purpose |
| This machine has a single spindle with a tool magazine controlled by a computer and can be used for processing any material in the non-metallic field. The double table can place different parts for simultaneous processing and can be used as matching workpieces. |
| The multi-tool magazine can do sawing, drilling, milling, grooving, male and female tenons at the same time. Non-metallic materials can be processed at the same time. It is a non-directional all-round computer integrated machining center. |
| It is suitable for processing cast wooden models, composite materials, aerospace, high-speed rail interior and filling materials, furniture dining chair parts, bedroom (room group) furniture five-dimensional complex parts full three-dimensional processing. Most complex processing operations can be completed with high quality. |
| 2. Working conditions and environment |
| 1. Processing product materials: carbon fiber, fiberglass, wood, resin board, PVC, organic glass, etc. |
| 2. Applicable power supply: three-phase 380V±10% 50Hz±2%; |
| 3. Relative humidity: 61-81%; |
| 4. Temperature: -15℃～40℃; |
| 5. Working system: annual working time: 3000 hours; can work continuously. |
| Model |
SH-TC1 |
| X-axis travel |
3800mm |
| Y/V axis travel |
1480mm |
| Z-axis ravel |
900mm |
| A-axis travel |
No restrictions |
| C-axis travel |
±540° |
| Max processing speed |
20-50mmin |
| Installation dimensions |
6000*3000*3800mm |
|
4. Application Parameters
|
| 1. Processing range |
| X-axis |
3000mm |
| Y-axis |
1400mm |
| Z-axis |
800mm |
| A-axis |
+-200 degrees |
| C-axis |
+-370 degrees |
| V-axis |
1400mm |
| 5. Technical Description |
| Fuselage structure: Heavy rigid structure: Thick steel plates and high-strength horizontal line components minimize the deformation of the fuselage caused by the previous processing. The crossbeams are welded with heavy H steel and steel plates, and the base is made of square steel or steel plates with a wall thickness of 10-20MM. Ensure that each machine is annealed! (Few domestic manufacturers can do this!) |
| Axis movement: High-precision ball screw and pre-installed nut are used to compensate for backlash and ensure the accuracy of repeated positioning. Power is transmitted to the screw through mechanical nodes. |
| Axial drive: Adopt Taiwan's new generation large inertia AC servo motor, the world's top control method - bus absolute value control. There is a digital interface between the CNC device and the axial drive. |
| Axial movement rails: All axial movements use precision linear guides. |
| Central lubrication system: All guide rails, sliders and lead screws are integrated into the central lubrication system. |
| CNC system: control system based on industrial computers. It adopts the new generation of Taiwan Synology (Windows real-time system), which highlights the real-time function. The equipment is directly controlled by the industrial computer without any other hardware. Since the software controlling the equipment runs directly on the personal computer instead of a specific hardware device, the system structure becomes simpler, ensuring higher performance and reliability. |
| 6. Five-axis programming software |
| It supports multiple types of highly flexible 5-axis programming software, which can be used to write CNC programs according to drawings and to generate flexible CNC codes according to the requirements of processing samples. |
| The post-processor provided for ALPHACAM, UG, and PM programming software enables the machine to achieve the highest production efficiency in the simplest way, making programming simpler and easier to use. |
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
