DNH-C系列数控整流子点焊机

型号：	DNH-C
品牌：	HR
原产地：	中国
类别：	工业设备 / 其他工业设备
标签︰	点焊机
单价：	-
最少订量：	1 件

发送查询

产品描述

DNH-C系列数控整流子点焊机

基本信息

该设备是由欧姆龙PLC可编程控制器组成的自动点焊设备。可以焊接各种类型转子换向器。人工放人转子，设备自动夹紧、光电找首槽、焊接。

该点焊机实用于汽车电机、电动工具和微电机等直流电机生产厂家焊接电枢引线到它的换向器。将一电枢放入定位座，对准焊接部位，启动开关。机器将自动点焊和分度，直至电枢点焊完成并自动推出焊接完成的电枢，然后操作者移去电枢放入另一个电枢在定位座，又重新开始此循环

技术参数

产品特点

1、欧姆龙PLC控制焊接动作；
2、欧姆龙液晶触摸屏进行参数输入操作；
3、进口米亚基MIYACHI电流控制器控制焊接电流(次级
电流控制)，可储存15种焊接规范；
5、步进电机精确分度，方便更换产品操作；
6、电极钨棒加长150ram，提高电极使用率；
7、主、负电极安装铜块以及各发热部分均采用循环水冷却；
8、外加进口铝合金框架，配专用吸烟口保证操作人员安全。

9、配备红外温度监控，形成全闭环控制，能精确控制焊点温度，获得高质量的均匀焊点。

英文资料

DNH-C digital-controlled commutator spot welder

This welder is an automatically spot welding equipment consisting of the Omron PLC programmable controller. It can weld all types of rotor commutators. It needs to manually put in the rotor, and then the equipment will automatically clamp and weld that.

This equipment has the following characteristic:

Omron PLC controls welding operations.
Parameter input by the Omron liquid-crystal display touch screen.
Welding current is controlled by the MIYACHI current controller (secondary current control) which can storage 15 kinds of welding standards.
Using the infrared temperature monitoring to form entire closed-loop control, which can accurately control the temperature of the welding points, and obtain high quality and uniform welding points.
Using stepper motor to accurately calibrate the angles, which is convenience to change the operations.
Tungsten stick of the electrode can be lengthened to 150 MM, which increases the utilization efficiency of the electrode.
The cycle water cooling system is used to cool the installing cooper billets of the main and negative electrodes as well as other heating parts.
The aluminum alloy frames and special-purpose smoking equipment to protect the safe of the operators.