- 适用于 MS-DOS, IBM-DOS, OS/2, NCR, NEC, Windows 95/98/ME/NT/2000/XP/VISTA, Macintosh IDE bus, Unix, Xenix, Linux, FreeBSD, BeOS,Novell, Solaris...等不同作业系统。
- 电源自动控制, 并具备保护线路, 快取记忆体设计, 加快执行速度。
- 复制方式采同步独立式, 包括复制(COPY),比对(COMPARE),检测(VERIFY)等皆可同时完成, 操作方式最为简便。单独之复制, 比对或检验亦可选择执行。
- 功能齐全: 快速复制, 区块复制, 影像档复制, 全部复制, 硬碟参数手动设定, 硬碟自动侦测及检验等全部齐备,不需另购任何设备或连接电脑。
- 支援LBA 规格大容量硬碟(500GB以上), PIO mode及Ultra-DMA 33/66/100/133,S-ATA I/II皆能使用, 具自动侦测功能。(PATA(IDE)硬碟需选购转接板)
- 2.5" ,3.5" SATA硬碟皆可使用。 (1", 1.8" PATA(IDE) 硬碟需选购转接板)
- 支援不同厂牌、不同容量硬碟同时复制(凡是FAT架构者皆可转换)。
- 母硬碟(master)若同时具备不同OS亦可复制拷贝。
- 支援RAID #0, #1磁碟阵列复制。
- 支援多磁区不同厂牌、不同容量硬碟同时复制。
- 具有硬碟多种资料清除功能:可有效抹除硬碟中的资料,清除病毒残留,并可修复硬碟启始磁区错乱。
- 俱备未来升级能力。
- 俱备散热风扇,有效降低硬碟工作中的高温。
- 可选购警示灯,方便工作中辨识。
- 可设定工作密码,防止他人擅用。
- 可检测坏轨硬碟。
- 俱备CRC, MD5检查码设定。
- 可连线电脑监控工作过程。
- SATA汇流排传输率:9000MB/min, PATA(IDE)汇流排传输率:9000MB/min (TA-2000) ; ;拷贝速度决定于硬碟磁头读写速度,转速,记忆体大小。
- SATA bus 14-target high speed hard drive duplicator, offering up to 14 target hard drives’ duplication in one operation. Data transfer bandwidth up to 9GB/minute.
- On-board directly copy SATA bus 2.5” or 3.5” hard drive with SATA-I/II spec. For IDE bus hard drive, users can copy it through optional SATA3 adapter to convert SATA to IDE bus.
- Suitable for Microsoft Windows 98/ME, Windows 2000/XP, Windows Vista, etc. with FAT16/32 or NTFS structure, Linux, Novell Netware, Unix/Xenix, Mac OS, etc.
- Ready for copying the RAID#0 or RAID#1 system. When duplicating RAID#0, the transfer rate can reach twice of that original speed.
- DD image function provided to support big master mode. Many master hard drives could be preloaded into one big master and stored as an image file. Users can simply select the file in big master to copy their target hard drives. Old day’s trouble of managing/keeping too many master hard drives can be avoided.
- Quick copy mode to copy meaningful data area is provided to shorten the time of duplication. (Suitable only for Microsoft Windows system, Linux system or Linux-like system.)
- Built-in 500W power supply unit to support sufficiently the power requirement of all connected hard drives.
- Three built-in cooling fans to cool off the heat generated by all connected hard drives during operation.
- Traditional RS-232 interface built-in to get logfile so as to support world widely within short time.
- Optional three-color alarm lamp to give significant signal to operator so as to take a prompt action on machine, no matter the operation stops normally or in critical situation. Mostly suitable for factory usage, especially in situation of fewer operators to operate many machines.
- Small occupation, easy to operate.
- Stabilize the hard drives by clip design when placing hard drives on top of machine; avoid the vibration of hard drives themselves during operation to cause damage.
- Module design, easy to maintain.
- Firmware can be easily upgraded.
|
