1. 远红外电热膜用纳米导电碳浆

nano conductive carbon paste used in far-infrared electric heat membrane

单一组分，加温固化，优良的印刷性，对基材的附着力好，电热状态下功率稳定性好，发热效率高，具有远红外功能，产品使用寿命长，适用于丝网、凹版等印刷方式。

（1）   长期工作温度≤60℃：适用于PET、PI等电热膜。实验数据（仅供参考）：

连续通电30天，表面温度60℃左右，无外控温装置，功率变化率<±2％。

（2） 长期工作温度≤100℃：适用于环氧玻纤板等电热板。实验数据（仅供参考）：

连续通电30天，表面温度100℃左右，无外控温装置，功率变化率<±3％。

（3）长期工作温度≤100℃：适用于尼龙布等电热布。实验数据（仅供参考）：

连续通电30天，表面温度100℃左右，无外控温装置，功率变化率<±2％。

（4）长期工作温度≤140℃：适用于环氧玻纤板等电热板。实验数据（仅供参考）：

连续通电30天，表面温度140℃左右，无外控温装置，功率变化率<±2％。

 以上四种导电碳浆属于不同产品，同属于电热型导电碳浆，具体请来电来函咨询。

Single component, curing with heat, excellent printability, excellent adhesion on substrate, power stability in the electric heat state is good,

high heat efficiency, far-infrared function, long service life, be suitable for printing patterns such as silk screen、intaglio printing and so on.

(1) Long-term working temperature ≤ 60 ℃: be suitable for electric heat membrane on the substrate of PET and PI and so on, Experimental data (reference only): galvanization Continuously for 30 days, surface temperature of about 60 ℃, without external temperature control device, rate of power change: <± 2%.

(2) Long-term working temperature ≤ 100 ℃: be suitable for electric heat board on the substrate of epoxy and so on, Experimental data (reference only): galvanization Continuously for 30 days, surface temperature of about 100 ℃, without external temperature control device, rate of power change: <± 3%.

(3) Long-term working temperature ≤ 100 ℃: be suitable for electric heat Cloth on the substrate of nylon and so on, Experimental data (reference only): galvanization Continuously for 30 days, surface temperature of about 100 ℃, without external temperature control device, rate of power change: <± 2%.

(4) Long-term working temperature ≤ 140 ℃: be suitable for electric heat board on the substrate of epoxy and so on, Experimental data (reference only): galvanization Continuously for 30 days, surface temperature of about 140 ℃, without external temperature control device, rate of power change: <± 2%.

Four conductive carbon pastes above belong to different kinds of product, but all belong to electric heat conductive carbon paste, welcome to call us for details.

2. 薄膜开关等柔性线路板用导电碳浆 

conductive carbon paste used in membrane switch FPC

单一组份，可供方阻：10Ω/□～10MΩ/□，优异的柔韧性、印刷性及附着力，表面硬度高，阻值持久稳定性高，受温度影响阻值变化极小，具体欢迎来电来函咨询。

Single component, available square resistance：10Ω / □～10MΩ / □,excellent flexibility、printability and adhesion,surface hardness and lasting stability of resistance are high, resistance changes affected by temperature is little, welcome to call us for details.

3. 触摸屏、冷光片等用导电碳浆

conductive carbon paste used in Touch screen and EL film

单一组份，可提供阻值很低，对ITO膜、PET膜、玻璃等的附着力优异，固化温度低，固化时间短，表面硬度高，具体欢迎来电来函咨询。

Single component, very low available resistance, excellent adhesion on

ITO film、PET film and glass ect., low curing temperature, short curing

time, high surface hardness, welcome to call us for details.

4. 太阳能电池用导电碳浆

conductive carbon paste used in solar battery

单一组份，对基材玻璃、单（多）晶硅片等的附着力优异，耐高压、高温、高湿等，大功率，产品的稳定性高，使用寿命长，具体欢迎来电来函咨询。

Single component, excellent adhesion on Single (multi) silicon wafer and glass, be able to bear high voltage、high temperature and high humidity ect., large power,high product stability, long service life, welcome to call us for details.

5.  检测试剂条用导电碳浆

conductive carbon paste used in detection reagent strips

单一组份，加温固化，可供方阻10Ω/□～10MΩ/□，优异的印刷性及附着力，表面硬度高，耐磨性好，阻值持久稳定性高，检测敏感性好，具体欢迎来电来函咨询。

Single component, curing with heat, available square resistance：10Ω / □～10MΩ / □, excellent printability and adhesion, high surface hardness, good abrasion, lasting stability of resistance are high, good Detection sensitivity, welcome to call us for details.

6. 灯管等光源用导电碳浆

conductive carbon paste used in lamp light

对灯管的附着力高，耐摩擦性能优异，耗电量更小，亮度更高，具体请来电来函咨询。

high adhesion on lamp ,excellent performance of abrasion, smaller power consumption, higher brightness, welcome to call us for details.