The line is applied to the forming and producing of refrigerator side panel. It mainly consists of loading station, punching station, 180^o overturning station, rolling station, cutting station, bending station, 90^o bending station, flanging station, unloading machine, pneumatic unit, hydraulic unit, electric control unit, etc. Except the double panels (right+left) production, this line is compatible for single panel.

    Working procedure: Loading automatically, punching, sheet turning, rolling, foaming, cutting, stage foaming, end-bending, unloading and so on.

    Reasonable configuration, being easy to adjust to manufacture, different products, high productivity, easy maintenance.

 

 

1.Out dimension: 48000×3500×2000mm(L×W×H)

2.Working surface height: 900mm above the ground

3.Station: 9

4.Formed Width: 400~650mm

5.Formed length: 1000~2000mm

6.Cycle time: 20s/set

7.Sheet material: cold rolled plate, pre-painted plate or PCM with film

8.Sheet thickness: 0.45~0.6mm

9.Total power: ~50kw

10.Total air supply: ~2m³/h

11.Industrial water: ~10m³/h