Super-high Pressure Water jet Cutting Equipment

MPA420 water jet with the imported German FLOW intensifier.
This MPA420 high pressure generating system is utilizing hydraulic transmission technology. This Water Jet King Kong is professional for fragile and thin material's high speed cutting such as metal and stone.

Effective Cutting Area of the Workbench:
X-axis: 3000 MM
Y-axis: 2000MM
Z-axis: 150MM
Maximum Size of the Workbench
X-axis: 3050MM
Y-axis: 2050MM
Z-axis: 150MM
Height of the Workbench 1000MM
Cutting Accuracy plus or minus 0.2MM
Control Accuracy plus or minus 0.01MM
Repeat Positioning Accuracy plus or minus 0.01MM
Rapid Positioning Speed 10000mm/min

Cutting Platform

Guideway: Using the high-precision linear rolling guideway and ball screws without gaps with THK nuts or domestic ground ball screws without gaps to ensure high cutting precision.

X-axis and Y-axis: Using the servo motor imported from Japan to drive the cutting to ensure cutting accuracy.

Dust-proof design: Internal black organ-style dustproof cover against dust and water to ensure the cleanness of the screw guideway, so as to ensure cutting accuracy and easy cleanness and maintenance of the equipment.

Centralized automatic lubrication system: When the guideway runs 10000KM, the lubrication system will automatically conduct lubrication, to ensure correct operation.

Automatic manual-operation system: To achieve long-range operation, ensuring the operator's safety and convenience.

Pneumatic unloading valve: Instant on-off without resistance, accurate and effective unloading of the pressure of the system, to achieve operation without load and no-load start of the air knife