KATO spring steel wire Lo sets
| Model: | M2-M8 |
|---|---|
| Brand: | kato |
| Origin: | Made In Japan |
| Category: | Industrial Supplies / Machine Hardware / Nuts & Bolts |
| Label: | Tangless inserts , KATO inserts , KATOTangless inserts |
| Price: |
¥1.5
/ pc
|
| Min. Order: | 100 pc |
Product Description
KATO spring snails description:
The KATO spring snails sets developed a new thread on the basis of the common thread jacket jacket products, KATO spring threaded sleeve to overcome the traditional threaded sheath installation handle and installation of low efficiency, the traditional thread jacket handle slotted site installed can not precise control, causing the tail easily broken or too easy to break the phenomenon to the handle end of the easy processes, the impact threaded into serious impact on product quality and difficult to clean up after the removal of the tail, could easily lead to stranded, in severe cases can affect the entire product quality.
Traditional wire thread insert installation to handle serious impact on production efficiency, install slower. KATO spring set screw threaded rotation articulated installation tool, and give full consideration to the efficiency of the installation, the installation do not have to handle, non-directional.
No the KATO spring threaded sleeve with a tail screw sets the difference between:
The KATO spring threaded sleeve installation is relatively simple, non-directional, ease of installation, eliminating the need for a common tail wire thread insert to remove the tedious aspects of installation handle, save time and improve efficiency.
The KATO spring threaded sleeve and a tail threaded sleeve difference between the two:
KATO spring screw installation without removing the trouble of the caudal peduncle is extremely convenient. Ordinary tail wire thread insert in the installation is complete, you need to install the handle thrust after the removal of the tail is not easy to clean, easy to cause retention in severe cases can affect the quality of the product.
The KATO spring screw sleeve and tail screw difference between the three:
No tail wire thread insert installation tool is complete, including pneumatic, electric tools, bulk installation of supporting tools such as a stent, is suitable for installation of large quantities of very great help to improve work efficiency.
The KATO spring snails sets developed a new thread on the basis of the common thread jacket jacket products, KATO spring threaded sleeve to overcome the traditional threaded sheath installation handle and installation of low efficiency, the traditional thread jacket handle slotted site installed can not precise control, causing the tail easily broken or too easy to break the phenomenon to the handle end of the easy processes, the impact threaded into serious impact on product quality and difficult to clean up after the removal of the tail, could easily lead to stranded, in severe cases can affect the entire product quality.
Traditional wire thread insert installation to handle serious impact on production efficiency, install slower. KATO spring set screw threaded rotation articulated installation tool, and give full consideration to the efficiency of the installation, the installation do not have to handle, non-directional.
No the KATO spring threaded sleeve with a tail screw sets the difference between:
The KATO spring threaded sleeve installation is relatively simple, non-directional, ease of installation, eliminating the need for a common tail wire thread insert to remove the tedious aspects of installation handle, save time and improve efficiency.
The KATO spring threaded sleeve and a tail threaded sleeve difference between the two:
KATO spring screw installation without removing the trouble of the caudal peduncle is extremely convenient. Ordinary tail wire thread insert in the installation is complete, you need to install the handle thrust after the removal of the tail is not easy to clean, easy to cause retention in severe cases can affect the quality of the product.
The KATO spring screw sleeve and tail screw difference between the three:
No tail wire thread insert installation tool is complete, including pneumatic, electric tools, bulk installation of supporting tools such as a stent, is suitable for installation of large quantities of very great help to improve work efficiency.
| Payment Terms: | DP |
|---|---|
Member Information
| Suzhou CAS was able to Mechanical & Electrical Co., Ltd. | |
|---|---|
| Country/Region: | Jiang Su - China |
| Business Nature: | Manufacturer |
| Phone: | 13328056795 |
| Contact: | Zeng Yi-fan (Salesman) |
| Last Online: | 18 Nov, 2019 |
