Self tapping screw

Self tapping screw
Model:M2.5-M24
Brand:CAS was to
Origin:Made In China
Category:Industrial Supplies / Machine Hardware / Nuts & Bolts
Label:Since the installati , Self-tapping bushing , Installing self-tapp
Price: ¥1.5 / pc
Min. Order:100 pc

Product Description

Self-tapping screw sleeve installation method:
                      
 There are two processing methods:

Installation: can be taken when the installation of a small number of simple installation methods, the concrete is to take the corresponding specifications bolt + nut
Installation: when install a large number of available special thread insert installation tool, the specific method of operation with reference to the following figure.

Self-tapping screw sleeve Installation Notes

For different processing materials reference borehole sizes, pre-drilling. When the corresponding materials with higher hardness, a slight increase in drilling within the open bottom outlet.

Slotted end of the downward self-tapping threaded sleeve completely installed into the tool front-end to be vertical contact with the workpiece. Load (1-2 pitch) Make sure to align the bottom outlet, must not be tilted. Found inclined, please do not reverse tool and re-adjust the re-use. Enter 1/3 to 1/2, we can not come back again. Also, please do not reverse the rotation tool, which will cause product failure.
Payment Terms:DP
Self tapping screw 1Self tapping screw 2Self tapping screw 3Self tapping screw 4Self tapping screw 5

Member Information

Suzhou CAS was able to Mechanical & Electrical Co., Ltd.
Country/Region:Jiang Su - China
Business Nature:Manufacturer
Phone:13328056795
Contact:Zeng Yi-fan (Salesman)
Last Online:18 Nov, 2019