Car care products/Car cleaner

T431 Cooling System Cleaner effectively cleans in one simple twenty-minutes operation. Many similar products have to be left in the cooling system for several days, which creates the risk of the user either forgetting or extending the drain and flush time for reasons of convenience. The results can be detrimental and cause expensive, long-term damage to the cooling system and associated components. T431 overcomes this potential risk as the whole cleaning process is completed in one simple operation.

Recommended Uses:

Use T431 before removing a radiator from a vehicle for reconditioning. Clean the entire system with T431 so when the radiator is reinstalled, the core will not be contaminated with scale and residue from the rest of the system.
Use T431 as a complete Cooling System Cleaner to remove insulating built-up sludge and residue before changing coolant in any cooling system. This procedure will ensure optimum heat transfer and efficiency of the entire cooling system.
Whenever draining a cooling system or changing brands of coolant it is always recommended to clean the system with T431.
Directions for Use:
Note: Exercise caution when removing radiator caps. Release pressure slowly to avoid scalding.

Turn on the heater and add required amount of T431 to a warm radiator.
Run the engine for 20 minutes minimum (no longer than 1 hour). Stop the engine and allow it to cool.
Drain the system by removing the bottom radiator hose or opening the drain cock. Thoroughly flush and rinse out all old coolant. Replace the hose or close the drain cock.
Start the engine, check for leaks and top up as necessary.

Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
Customer's Design and Logo are Welcome ,
Competitive Prices ,
Earth-friendly Products ,
Small Order Acceptable ,
ODM Accepted ,
OEM Accepted

Buyer Keywords
car care products, car cleaner, Cooling System Cleaner