| Function: |
| BOS05B/JKM surge protector is designed from IEC standard, it is divided into F connector, N connector, BNC |
| connector, also, it is fit for preventing coaxial communication facilities from lighting and surge, such as cctv system, |
| common television system, satellite-television receiving system, surveillance control system and video swift system, |
| etc. It can avoid serious damage which made by thunder and lightning induced voltage, electric network voltage |
| undulation disturbance, static discharge, and impact surge voltage. |
| |
| Feature: |
| 1. Adopt multilevel protection circuit, low-level persistent voltage. |
| 2. Adopt the famous German brand core components, and full copper BNC connector. |
| 3. It has great flow capacity, sensitive reaction. |
| 4. Excellent performance, and low-loss insert. |
| |
| Specification: |
| Model |
BOS05B/JKM |
| Continuous operating voltage Un |
5V |
| Maximum working voltage Uc |
10V |
| Nominal discharging current In (8/20us) |
5KA |
| Maximum discharging current Imax (8/20us) |
10KA |
| Limit voltage Up |
15V |
| Data transmission rate Vs |
10Mbps |
| Insert loss Ae |
0.2dB |
| Response time Ta |
1nS |
| Joint form |
BNC、F、N |
| Protection form |
Line to line, line to earth |
| Dimension |
25mm*25mm*54mm(does not include the joint) |
| Working conditions |
Temperature -25—+65℃；Humidity≤95%（25-30℃） |
| Test standard |
IEC61643-21：2000 |
| |
| Installation and Maintenance: |
| 1. The video surge protector device should be linked between the signal line and the protected equipment. |
| 2. "In" must be connect the signal line;"Out" must be connect the protected equipment, do not connect in the |
| opposite direction. |
| 3. Credibly connect the grounding lines. This product need not pay special attention to maintenance, but please |
| waterproof notice. When the system working goes wrong, please check the surge protector after removing it. If |
| unused thesurge protector condition,but the system working normal, meaning the surge protector is damaged, |
| please change the surge protector. |
