| 1. Adopt 2.4GHZInternational general frequency,Using RF CMOS highly integrated IC,highly integrated power amplifier (PA ) |
| and voltage-controlled oscillator(VCO), dual track video and audio modulated together,power amplifier back stage adopt |
| German brand GaAs chip,excellent high power sending,long distance,image stable voice frequency loudness clear, |
| unobstructed effective range greater than 2km,can be received clear stable image. |
| Modulation mode: FM /FSK |
| Frequency range: CH 1= 2414MHZ CH 2= 2432MHZ CH 3= 2450MHZ CH 4= 2468MHZ optional |
| |
| 2. Specification |
| Transmitter: Video input: 1 channel; dual track accompanying sound input: 2 chs (6.0MHZ NTSC 6.5MHZ PAL ) |
| Transmission power: 32.5dBM |
| Max currents consumption:1600mA |
| Input Voltage: 12V |
| Receiver: Frequency: CH 1=2414MHZ CH 2=2432MHZ CH 3=2450MHZ CH 4=2468MHZ |
| Sensitivity: -90dBm |
| Max currents consumption: 160mA |
| Input Voltage: 5V |
| Video output: 1 channel; dual track accompanying sound input: 2 chs (6.0MHZ NTSC 6.5MHZ PAL ) |
| Working temperature : -10-120 ℃ |
| Radiation distance : unobstructed effective range greater than 2km |
| |
| Unobstructed condition testing: Between with transmitter and receiver,confirm can received clear stable image |
| within 2km. In market,some similar products, nominal transmission distance are very different with yourself testing |
| |
| 3. Installation: |
| 1. Select the device operating frequency. (Note: The transmitter and receiver must be set to the same frequency, otherwise |
| not receive the signal!) |
| 2. The receiver audio and video input connect with TV or Monitor audio and video cable output. |
| 3. Installation of equipment antenna |
| 4. Plug in the power matching, power indicator light. |
| 5. Transmitter and receiver installed, observe the reception by adjusting the angle of transmitter and receiver antennas, |
| so that voice and image to achieve the best effection |
