Detailed Product Description

1.paint film is tough, adhesion and flexibility is good
2.water resistant, good alkali resistance
3.adornment sex is good

A, composition:

    by epoxy resin, resistance to sun pigments, fillers  deployment of  two-component solvent epoxy resin paint.
Second, major features:
1.paint film is tough, adhesion, flexibility is good
2.water resistant, good alkali resistance
3.durability, excellent corrosion resistence
4.adornment sex is good
5.weatherability, slightly less by long-term exposure to the sun, the surface will occur slight pulverization, but to protect the impact is not big.
Three, use:

    for alkaline gas or and coastal salt fog gas contact steel structure and concrete surface and in the water.
Four, performance and technical parameters:
1, color:                                     various
2, density:                                 about 1.27 kg/L
3, flash point:                            22 °C
4, theoretical usage:                about 133 g/m2 (smooth surface, the theoretical value)
5, dry film thickness:                25 to 30 μ m
6, dry time:
 temperature                             5      20 °C    30 °C
Surface drying                          6 h   4 h        2 h
The actual dry                          24 h  8 h        4 h
7, the interval time:
The surface temperature        20 °C     5 °C      30 °C
The shortest                             32 h       16 h       8 h
The longest                              5 d          3 d        2 d
8, matching:                            the first copies (coating) : a junior group b (curing agent) = 100:20 (weight ratio).
9, maturation period, party a and party b: two components mixed evenly, must be approved by age 30 min rear can use.
Five, the applicable 

    in 25 °C,approximately 8 h, use up in less than 5 °C should not be when construction.
Six, coating methods:

    brush, roller coating, high pressure without gas spraying, air spray all can
1 and nozzle diameter:        (1) high pressure without gas spraying: 0.4--0.5 mm;

                                               (2) the nozzle diameter: 2.0--2.5 mm.
2, gushing pressure:           (1) high pressure without gas spraying: 15-20 Mpa;

                                              (2) air spray: 0.3 0.4 Mpa.
3, thinner:                            102 special thinner
4, fly amount of thinning:     0-5% (in paint weight plan)
5, surface treatment:          the preceding film dry and remove all dirt on film. Concrete must be dry, sandblasting processing of dust, removed from the surface floating cement and contamination.
6 and construction conditions: substrate temperature shall be above 3 °C above the dew point, relative humidity should be less than 85 °C.
Seven, the preceding supporting coating: epoxy primer (or direct coating in quality derusting Sa2.5 level to the steel plate)
Eight, the storage period:

    12 months.
Nine, statement:

    the above this  product information and data is according to our test and actual the experience of accumulating and can be used as a guide for construction. For we do not understand in the construction, our factory only guarantee that the quality of the paint itself, will not be responsible for other aspects. This specification, and we will be according to the continuous improvement of products shall have the right to make changes.