This power unit is designed exclusively for the electric-basket ball stands,consisting of two independent, typical 'power up, gravity down' circuits for the up and down movements of the basketball board and teh whole basketball stand. The pressure switch will stop the motor once the basketball board or the whole stand is completely lifted. The pressure-compensated balance valves make the lowering movements very smooth.

 

2. Special Notes

1) Clean all the hydraulic parts concerned before mounting the power unit.

2) Viscosity of the oil should be 15-68 cst.

3)This power unit should be mounted horizontally.

4)Check the oil level in the tank after the first start of the power unit.

5)Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.

6) We are at your disposal to offer you the power units with your favorate  power, flow, pressure as well as the tank capacity.