Applications
◎ Motors
◎ Transformers
◎ Coils
◎ Electronics, sensors
Benefits
◎ Miniature size, easy to install
◎ Shock and vibration tested
◎ Little current effect, no big differential between operation and reset temperature caused by current flowing through the protector
◎ Tested for audio, video applications
Technical data
◎ Version
Normally closed and normally open
◎ Rated current
2.0A/1.6A, 3.0A/2.5A at 250V 50/60 Hz (Power factor 0.95/0.6)
◎ Switching cycles under rated current
10000 cycles
◎ Temperature rating
50℃-160℃ (Steps in 5K)
◎ Tolerance
±3℃, ±5℃(standard)
◎ Contact resistance
< 50mΩ (incl. wire of 100mm)
◎ ON-OFF differential temp (general)
30 ± 15 ° C
◎ Dielectric strength ( standard insulation )
2kV
◎ Shock / vibration testing ( similar to EN 50155 )
400 m/s2 sine half wave / 100 m/s2 5 Hz ... 2,000 Hz sine
◎ Resistances to impregnation
Tight against ordinary resins and lacquers
◎ Degrees of protection provided by enclosures ( EN 60529 )
IP00
◎ Suitable for use in protection category
I, II
◎ Approvals
VDE / ENEC EN: EN60730-1/-2-3/-2-9
UL: UL2111 / UL873
CSA / cUL: C22.2 No.77 / C22.2 No.24