Applications
◎  Motors
◎  Transformers
◎  Coils
◎  Electronics, sensors
◎  Process automation

Benefits
◎  Miniature size, easy to install
◎  High current rating up to 30A
◎  Little current effect, no big differential between operation and reset temperature caused by current flowing through the protector
◎  Manifold executions
◎  Special low current version

Technical data
◎  Version
    Normally closed and normally open
◎  Rated current
    6.3A/10A/13A/250VAC  at 250V 50/60 Hz （Power factor 0.95/0.6）
◎  Switching cycles under rated current
    10000 cycles
◎  Temperature rating
    50℃-190℃ (Steps in 5K)
◎  Tolerance
    ±3℃, ±5℃(standard)
◎  Contact resistance
   < 50mΩ (incl. wire of 100mm)
◎  ON-OFF differential temp (general)
    30±15℃
◎  Dielectric strength ( standard insulation )
    2kV
◎  Shock / vibration testing ( similar to EN 50155 )
    400 m/s2 sine half wave / 100 m/s2 5 Hz ... 2,000 Hz sine
◎  Resistances to impregnation
    Tight against ordinary resins and lacquers
◎  Degrees of protection provided by enclosures ( EN 60529 )
    IP00
◎  Suitable for use in protection category
    I, II
◎  Approvals
   VDE / ENEC EN:EN 60730-1 /-2-9
              UL:UL2111 / UL873
       CSA / cUL:C22.2 No.77 / C22.2 No.24