The soft bullet epoxy potting

Model:	LD-103
Brand:	Leading
Origin:	Made In China
Category:	Chemicals / Resin
Label:	Elastic potting , Colorless transparen , Epoxy elastic soft
Price:	¥40 / kg
Min. Order:	10 kg

Inquire Now

Product Description

This product is a flexible potting compound, which is characterized by its unique characteristics: In addition to the general characteristics of the epoxy potting compound, with high elasticity. Compliant elastic potting applies.

First, the appearance and characteristics:

Project A B

Viscosity: (40 ° C cps) 1100-1150 25

Appearance: colorless transparent

Or you can specify a colorless, transparent

Or yellowish

Second, the ratio: weight ratio A: B = 2:1

Second, use:

1 Preheat: pouring device at 70-80 ° C bake for 1-2 hours to remove moisture.

2, mixed: Weigh a certain amount A material, then, to join the B material, stir.

Degassing: Mixture vacuum for 15-20 minutes in a -0.095 to-0.1Mpa, and then packaged. If the bubble is more difficult to Tuojin, set the A material pre-drying at 60 ℃.

4, casting: the defoamed mixture poured into the device.

Third, the curing conditions:

The curing process: 50 ℃ × 2h + 80 ℃ × 2h or need to be adjusted according to the user.

Fourth, the use of time: at room temperature for 1 hour.

Five cured Performance:

Thermal Shock -55 ° C - +125 ° C without cracking

Tensile strength (at room temperature) PA 7.8 × 1016

Elongation (at ambient temperature)% 140-300

The tensile permanent deformation (at room temperature)% 0

Compression failure strength (at room temperature) Pa 2.1 × 105

Destruction of compression ratio (room temperature)% 53

Shore hardness (D) 40-70