104A / B retardant electronic potting compound potting material of all kinds of electronic components and assemblies. The potting compound of two components of the resin and hardener at room temperature for easy flow of liquid.

Two process characteristics

  The resin and hardener are uniformly mixed by a certain percentage (typically 2:1), can be directly machinery casting or hand-casting and molding methods of electronic components or assemblies, potting, available 24 hours after a resistance flammable sealant.

Three material characteristics

  104A / B electronic potting materials, with good insulation, liquid casting small thermal expansion, low creep resistance, flame retardant, shock, dust-proof, waterproof, adhesion and other fine features. In addition, I also have some of the characteristics of the potting change according to the user's requirements, to meet the needs of various industries.

Four purposes

  The material is mainly used for potting of electronic components, such as motorcycle electronic regulator, electronic ignition, display, communication cable connector, the microcomputer washing machine, dishwasher, dry capacitors and transformers and coils irrigation seal and electrical insulation.

Five transport storage and transportation

  1 This product is non-flammable, non-toxic, safe transport

  2 resin and hardener must be in a sealed, cool, dry and avoid strong sunlight, save.

Six use

  A, B component is placed in an oven heated to 60-70 degrees Celsius during the heating process, it must be absolutely sealed the two components in order to avoid moisture absorption, and A component 100 parts, 50 parts of component B, mixed thoroughly vacuum de-after the bubble can be used.

  A component 100 parts, 50 parts of component B, mixed evenly with the heater on top after stirring heated to 60-70 degrees Celsius vacuum deaeration can be used.

Seven preservation methods

  The sealant must be kept in a dry, cool environment, absolutely avoid exposure to moisture.

Eight Special Considerations

  The adhesive used must be immediately sealed with plastic bucket inside and outside cover, absolute ban on contact with the air for a long time, to protect the product from moisture completely scrapped. In order to use The adhesive must be done in six words: weighed, mix, moisture-proof.