LX-6 Auto PET Bottle Blow Molding Machine

Model:	LX-6
Brand:	Longsun
Origin:	Made In China
Category:	Industrial Supplies / Rubber & Plastics Machine
Label:	PET bottle machine , blow molding machine , bottle blow machine
Price:	-
Min. Order:	1 pc

Product Description

Product features:

1. High efficiency, power save

2. Fully automatic

3. PLC control

4. Excellent and stable product quality

5. Human-machine interface, easy operate and control

6. Low machine noise

7. High hygienic

8. Low production cost

9. Easy maintenance and high safety standard

10. Especially be suitable for small volume bottles without changeover

11. Less footprint area

Technical parameter

	Item	LX－6
Main machine	Maximum Bottle capacity	700ml
	Maximum bottle diameter	Φ68mm
	Neck diameter	Φ18~38mm
	Maximum bottle height under neck	<240mm
	Maximum preform height under neck	<115mm
	Clamping stroke	100mm
	Bottom die stroke	25mm
	Bottle pitch	76.2mm
	Maximum output rate (bph)	6,600
	Number of molds	6
Heating part	Number of heating modules	4
	Number of heating lamps	8
	Number of preform bases	108
Electric part	Voltage	380V
	Frequency	50Hz
	Service power	24~36kw/h
	Installation power	70kw
Air source	Low pressure	1Mpa
	Low pressure air consumption	3m³/min
	High pressure	3.5Mpa
	High pressure air consumption	4m³/min
Chilled water (Water temperature ≤18℃)	Pressure	2~4bar
	Flux	6m³/h
Weight	G.W.	Around 6,000kg
Dimension	Main machine (L×W×H)	4100×2300×2300mm
	Preform unscrambler(L×W×H)	2800×2800×3000mm
Remarks: * 6600bph output rate base on 555ml, 18 gram C’estbon water bottle. * High pressure air consumption depends on PET bottle volume, altitude etc.