Ⅱ LX- 6EL Auto PET Bottle Blowing Machine Feature

2.1 New Auto Preform Unscrambler System

●Our machine adopts one-way preform-feeding structure and preform-separating is powered by servo motor structure that helps solve the preform block and abrasion problem.

●There is one photoelectric sensor to monitor the preform-loading and preform-separating process that will warn the operator to add the preforms into the hopper when lacks preform instead of stopping the machine.

 

2.2 New Heating System

lPerfect heating system design helps decrease the power consumption.

lSpecial oven design helps power saving and is easy maintain.

lEach lamp’s position and temperature can be adjusted according to clients’ needs.

lCooling water circular system helps keep the oven temperature constant.

 

2.3 The Application Of Servo System On Main Transmission

The transmission system adopts the special chains and is powered by servo motor, which helps orientate the preform heating base quickly, accurately and steadily when the machine starts running.

 

2.4 Servo Technology Innovation On Clamping System & Stretching

●Servo technology is applied in the clamping system, which can shorten the mould-clamping time and improve productivity.

●High pressure mold-locking unit helps solve the swelling mold and big joint line problems. 

 

2.5 Easy To Change Bottle Shape

Drawer type mold structure design makes it easy to change the mold. Within one hour, a mold can be replaced under the condition of the same bottleneck diameter.

 

2.6 Intelligent Human-Machine Interface

lHuman-machine interface control, easy operating and monitor.

lLive production information supervision and auto record production data everyday

lFailure warning and troubleshooting.

Technical parameter

Item LX－6EL Main machine Maximum Bottle capacity 2000ml   Maximum bottle diameter Φ106mm   Neck diameter Φ18~38mm   Maximum bottle height under neck <330mm   Maximum preform height under neck <155mm   Clamping stroke 120mm   Bottom die stroke 60mm   Bottle pitch 114.3mm   Maximum output rate (bph) 7,200   Number of molds 6 Heating part Number of heating modules 5   Number of heating lamps 10   Number of preform bases 100 Electric part Voltage 380V   Frequency 50Hz   Service power 30~40kw/h   Installation power 110kw Air source Low pressure 1Mpa   Low pressure air consumption 2m³/min   High pressure 3.5Mpa   High pressure air consumption 8m³/min Chilled water (Water temperature ≤18℃) Pressure 2~4bar   Flux 6m³/h Weight G.W. Around 10,000kg Dimension Main machine (L×W×H) 5800×2600×2600mm   Preform unscrambler(L×W×H) 4500×3500×3500mm Remarks: * 7200bph output rate base on 1555ml, 36 gram C’estbon water bottle. * High pressure air consumption depends on PET bottle volume, altitude etc.