Wuxi Linam is a professional manufacturer of high-shear emulsifiers at prices. Quality. After-sales service and other aspects have certain advantages. 1. The main structure of the high shear emulsifier is composed of main pot, water phase pot, oil phase pot, rack, electrical system, hydraulic system, vacuum system and heating system. The main pot is composed of a homogenizing stirring pot, a high shear homogenizing mechanism, a two-way mixing mechanism, a pot bottom discharge valve, a temperature control head and other structures. 2. The main features of the high-shear emulsifier produced by the factory are that the material of the high-shear emulsifier is pre-treated in the water and oil phase pot, and is sucked into the main pot by vacuum suction. In the main pot, the material is cut and crushed by a high-speed rotating homogenizer with 2800 R/min, and the material is stirred up and down with a two-way stirring frame, so that the material can be fully mixed, refined and crushed to 2um ~ 200 nm. The mixing frame of the High Shear emulsifier is equipped with a polytetrafluoroethylene scraper to ensure that the material does not stick to the wall, does not remain, does not have a dead angle, truly meets the GMP requirements of the manufacturer. 3. The high-shearing emulsifier produced by our factory is mainly used in linum high-shearing emulsifier, which is mainly used in the production of cream products for cosmetics and pharmaceutical enterprises. In addition, also often used in food, daily chemical, chemical and other enterprises of material refinement, crushing. As the materials in contact with the materials are high-quality SUS304 or SUS316L stainless steel, so it also has a safe, materials are not contaminated! By the majority of users love. If you have any questions about the high-shear emulsifier products, please contact Wuxi Linam Company for details!