1.        MFT-2 door gasket welder is used for the refrigerator door gasket. Freezer. Disinfecting cabinet door gasket, and other special equipment for welding, it is designed basis on Germany welder and development of stereotyped after the upgrading of products in the domestic door gasket welding machine. The field is advanced equipment.

2.        MFT-2 door gasket welder for the single angle of welding equipment, heating system using a smart silicon control regulator, replacing the regulator to ensure the accuracy of welding temperature and stability. Heater is made of a foreign custom-made materials

3.        The equipment weld an angle, the cycle is about 16 seconds, up to the efficiency of production operation proficient 500-600 sets / shift.

4.        Maintenance and repairs: The equipment in a long time at high temperature. High frequency. Impact, such as poor working environment, so the parts. Lubrication of the sliding surface is utmost importance, before each class in each part should be carefully carried out on the refueling lubrication to ensure normal operation of equipment

5.        Regular inspection of the oil-triple, to ensure that the cylinder. Electromagnetic valve lubrication well, to prevent the various components of non-oil work

6.        Welding die in a long time to work under high temperature, prone to blunt mould edge change, propose mill the knife edge of die in the use of a year.

7.        Regularly checked equipment to ensure that the precision of left and right tooling, adjust the slider screw tightness at the bottom of the left and right tooling to keep horizontal block gap between the heater and  left & right tooling , adjusting the gap right then tightening the fastening screws.

8.        For the replacement of heating pipe, they should cut off power, to be cooling down the heating block before  replacement of electric heating to prevent scald