1)        Amount:                                                 1  set

2)        Equipment size(for reference):        3000×3000×3600(L×B×H)mm

3)        Forming area:                                         2000mm×1000mm

4)        Maximum forming depth:                      700mm

5)        Heating power:                                      about 126Kw

6)        Total power consumption:                      about 145Kw

7)        Mode of forming:                                  Male forming

8)        Tact time: for3.2—5 mm HIPS board, 150-180s/per die for cabinet inner liner (not including manual loading and unloading time)

9)        Compressed air source:                          1/2’’(0.5-0.8Mpa)

10)    Total pneumatic capability:                    20m3/h(0.5Mpa)；

11)    Workbench height:                                 1155 mm

12)    Material thickness:                                 1.0—5 mm(for cabinet, thickness between 3.2-4.5 mm)

13)    Material Sheet:                                              ABS or HIPS