| fiberglass corner mesh with PVC Specifications: |
| 1. 16x16 mesh, 15x14 mesh, 12x12 mesh, 10x10 mesh, 9x9 mesh, 8x8 mesh, 6x6 mesh, 5x5 mesh, 5x4 mesh, 4x4 mesh, 3x3 mesh, 2.5x2.5 mesh, 1x1 mesh and so on |
| 2. Weight/sq.meter: 40g—800g |
| 3. Each roll length: 10m,20m,30m,50m—300m |
| 4. Width: 1m—2.2m |
| 5. Color: White (standard) blue, green, orange, yellow and others. |
| 6. We can produce many specifications and use different packaging according to customers’ requests. |
| |
| fiberglass corner mesh with PVC Application: |
| 1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen etc) |
| 2. Reinforced cement products. |
| 3. Used for Granite, mosaic, marble back mesh etc. |
| 4.Waterproof membrane fabric, asphalt roofing. |
| 5. Framework material for reinforced plastics, rubber products,. |
| 6. Fire board. |
| 7. Grinding wheel base fabric. |
| 8. Road surface with geogrid |
| 9. Construction caulking tape etc |
| |
| Detailed product describtion |
| PVC Corner Bead with Fiberglass Mesh/PVC Corner Bead |
| It used for construction to perfect the wall |
| Corner Bead with Fiberglass Mesh |
| The products can be widely used in all kinds of construction projects,to make the constrction simply, to cut down cost,to the angle of the wall artstic but not to be damaged.Using the corner beads,you can do the construction in steps,also can enhance the construction efficiency two to five times.The primary worker can replace the intermidiate worker after using the corner beads.For example.if using the corner beads,you can make the time of the building project reduce from ten months to seven or eight months.I am sure that the corner of the wall will not be splitted except you damage it on purpose. |
| |
| Specification |
| 1. The packing is 150 pcs per carton |
| 2. Length : 2M,2.5M |
| 3. Width: 20mm or 25mm |
| 4. Wing : 10mm |
| 5. Fiberglass mesh: 5*5mm ,5X5mm ,or meeting customer's needing. |
| 6.Weight:145g/m2,160g/m2 |
| |
| Corner bead is mold and extruded with rigid PVC compounds, it can be used for exterior and interior wall corners to provide a rustproof, high impact resistant non-kinking corner. It's an ideal material for builders of stucco and plastering. |
